Avalanche User Guide - Wavelink

131NOTE: You can also configure the refresh rate option when you configure the Client. Formore information, see Editing the Remote Control Package on page 109.To configure the refresh rate:1 From the Standard Viewer, click File > Configure.The Configure dialog box appears.2 From the Refresh Rate drop-down list, select the rate at which you want the screen displayto refresh.3 Click OK.The Configuration Data Change dialog box appears. This dialog box indicates that youchanged something from the original profile configuration.• If you want to use your updated changes, but do not want to update the configurationfile, select the Use New Configuration option.• If you want to use your updated changes and would like to update the configurationfile to reflect those changes, select the Use New Configuration and Update config fileoption.4 Click OK.Sizing the Mobile Device DisplayWhile you are viewing a device, you can configure the size of the mobile device display toscale from .5x - 4x. There is also an auto-scale option that will fit the display to the size of thewindow you have open.NOTE: You can also configure scale setting when you configure the Client. For moreinformation, see Editing the Remote Control Package on page 109.To change the display scale:• From the View Menu, select Scale and then the size you want the display to be.-Or-• Use the Zoom In, Zoom Out, or Autoscale toolbar options to adjust the size of the display.To set the scale for the profile:1 From the File menu, select Configure.The Configure dialog box appears.2 From the Scale drop-down list, select the size of the mobile device display.3 Click OK.