Avalanche User Guide - Wavelink

127To clear the log file:1 Click the Access Log tab.2 From the Edit menu, select Clear Log.-Or-Configuring LoggingRight-click within the log and select Clear Log.The Access Log tab clears.Remote Control supports the following log levels:• Critical. This level writes the least information to the log file, reporting only critical errorsthat cause a process to abort.• Error. This level writes Error messages and Critical messages to the log file.• Warning. This level writes Critical messages, Error messages, and Warning messages to thelog file.• Informational. This level writes enough information to the log file to diagnose mostproblems.• Debug. This logging level writes large amounts of information to the log file that can beused to diagnose more serious problems.You can change the logging for a particular connection session through the Configure dialogbox located in the Standard Viewer.To change the logging configuration:1 Click the Access Log tab.2 From the File menu, select Configure.The Configure dialog box appears.3 In the Logging area, select the log level from the Level drop-down menu.4 Enter the maximum size you want the log level to reach in the Max Size text box.5 Click OK.The Configuration Data Change dialog box appears. This dialog box indicates that youchanged something from the original profile configuration.