Avalanche User Guide - Wavelink

105Debug MailSessionEnables or disables a Remote Control log for sending mail.Timeouts tabTCPSendUDP RequestsUDPSMSWeb SessionHow long to wait (in milliseconds) before the TCP connection requesttimes out.If the server will attempt to use UDP to request the device to connect.How long to wait (in milliseconds) before the UDP connection requesttimes out.How long to wait (in milliseconds) before the SMS connection requesttimes out.The length of time (in seconds) before the connection to the RemoteControl Console will time out.VNC tabQuality The quality of the Remote Control display. This is on a scale of 1-100,where 100 is the best quality and 1 is the worst quality.Device RefreshViewer RefreshHow often the device screen is refreshed during a Remote Controlsession.How often the viewer screen is refreshed during a Remote Controlsession.Alt Server tabUse AlternateServerServer AddressSpecifies that the Remote Control Console should be launched using alocal server address. This option only needs to be enabled when theserver address in the Client Settings is a publicly available IP address.(For example, if the device is using a WWAN address.)The local Remote Control server address to use for launching theRemote Control Console.Encryption tabUse EncryptionPassphraseConfigures the server to use AES encryption.The passphrase to use for encryption. This can include ASCIIcharacters and be up to 64 characters long.