Avalanche User Guide - Wavelink

103Changing the Username and PasswordThe Remote Control Administrator user account is required to log in when you first configurethe server from a web browser. The default username is admin and the default password isadmin. Wavelink recommends you change at least one of these. You must log in using theaccount (or an Administrator Avalanche account) in order to change it.After you have completed the initial configuration of Remote Control and provided thedatabase address and password, use your Avalanche username and password to log in toRemote Control. Avalanche user permissions will be enforced. Only an AvalancheAdministrator will be able to view the Setup or System menus.To change the Remote Control Administrator username and password:1 From the Remote Control Console, click Password in the System Menu.2 Type the new username and password in the text boxes. When you change the password,you must type it a second time in the Retype Password text box to confirm that it iscorrect.3 Click Save.Synchronizing with the Avalanche License ServerConnecting to the Avalanche License ServerRemote Control must connect to the Avalanche license server in order to distribute licenses.The port 7221 should be unblocked between the Remote Control server and the Avalanchelicense server. The Avalanche license server is usually installed at the same location as theenterprise server. Configure the Avalanche server address for Remote Control after the serveris installed from the Remote Control Console.You can check to ensure the Remote Control server can contact the Avalanche license serverfrom the Remote Control Console.To configure the license server information from a web browser:1 From the Remote Control Console, click Licensing in the System Menu.2 Type the address of the Avalanche server in the License Server text box. The default Portfor the license server is 7221.3 Click Verify to check if Remote Control can contact the license server.4 Click Save.