Environmental Impacts of Multi-Storey Buildings Using Different ...
Environmental Impacts of Multi-Storey Buildings Using Different ... Environmental Impacts of Multi-Storey Buildings Using Different ...
Timber Plus ProjectINTERIOR WALL CLADDING, BATHROOMSWe note that “15mm regular MDF board” has been specified in bathroom areas. This is not at allrecommended due to the low moisture resistance of MDF. Treated ply or paint finished, finger jointed timberboards would be an acceptable alternative in this location used in conjunction with an efficient ventilationsystem. In wet areas (showers / splashbacks etc.) ceramic tiles on a fibre cement board substrate would berecommended.Material:Species:VOC Emissions:Transport:Certification:Available:Treatment required:Finish / Maintenance:10mm thick finger jointed solid timber boards or Ply.Pinus Radiata (plantation grown.Untreated wood has extremely low natural VOC emissions.Ply to be E0 standard.Grown / produced in New ZealandFSC CoC certifiedCarter Holt Harvey Ltd. www.chh.comNone.Ensure timber is not in direct contact with waterLife Expectancy as per Resene “Expected Life System Chart”- SC1 New and SC2 Repaint cosmetic only – 10yrs- SC3 – repaint with wear and tear – 5 yrsPaint finishDescription:Interior timber joinery - bathrooms, waterborne gloss1 coat:NRS: Resene Quick Dry, waterborne primer / u/coat2 coat:Resene Enamacryl, waterborne gloss enamel3 coat:Resene Enamacryl, waterborne gloss enamelSystem meets Green Star IEQ 13 requirements as at 15/05/08INTERNAL SOLID WALLSMaterial:105mm thick Leno Tec solid timber panels (Spruce).Species:Picea Abies.VOC Emissions: Emission class E1 using melamine resin. – Would not meet expected minimumrequirement of Green Star Office rating tool.Transport:Pre-fabricated in Europe and then shipped 20,000Kms to NZ. Not practical due tolarge panel sizes inconsistent with containerised transport.Certification:FSC certified timber unavailable in NZ. PEFC certified system acceptable as proofof sustainability but inadmissible for Green Star Office credits.Available:Scandinavian system sourced in Finland. Would require joint venture set-up withNZ company utilising local plantation timbers due to large panel sizes and hightransport costs. (N.B. without the use of large panel sizes the benefits of thesystem (quick and easy erection) are dramatically reduced).Processing Energy: Unknown.Treatment required: None.Surface Finishing: Low VOC Paint finish applied prior to delivery.Finish / Maintenance: Expected to exceed 60 year building life when used in a dry, ventilated indoorlocation. Life expectancy of coatings as per Resene “Expected Life System Chart”- SC1 New and SC2 Repaint cosmetic only – 10yrs- SC3 – repaint with wear and tear – 5 yrsPaint finishDescription:Interior timber surface, waterborne low sheen1 coat:Resene Quick Dry, waterborne primer /undercoat2 coat:Resene Zylone Sheen VOC FREE, waterborne low sheen3 coat:Resene Zylone Sheen VOC FREE, waterborne low sheenSystem meets Green Star IEQ 13 requirements as at 15/05/08Page 12 of 21 May 2008
Timber Plus Project15 MDFMaterial:Species:VOC Emissions:Transport:Available:Processing Energy:Treatment required:Surface Finishing:Finish / Maintenance:Medium density fibreboard (MDF).Pinus Radiata (plantation grown).GoldenEdge MDF is manufactured using phenol formaldehyde. It is certified ascomplying with the Japanese Industrial Standard JIS A5905 2003 for an F****grade MDF (also known as Super EO).Grown / processed in New Zealand.Nelson Pine Ltd. www.nelsonpine.co.nzProcessing plant powered with waste wood fuel.None.Low VOC Paint.Should not be used externally or in areas which are frequently damp. Lifeexpectancy of coatings as per Resene “Expected Life System Chart”- SC1 New and SC2 Repaint cosmetic only – 10yrs- SC3 – repaint with wear and tear – 5 yrsPaint finishDescription:Interior timber surface, waterborne low sheen1 coat:Resene Quick Dry, waterborne primer /undercoat2 coat:Resene Zylone Sheen VOC FREE, waterborne low sheen3 coat:Resene Zylone Sheen VOC FREE, waterborne low sheenSystem meets Green Star IEQ 13 requirements as at 15/05/0817 MDF CEILING TILESMaterial:Medium density fibreboard (MDF).Species:Pinus Radiata (plantation grown).VOC Emissions: GoldenEdge MDF is manufactured using phenol formaldehyde. It is certified ascomplying with the Japanese Industrial Standard JIS A5905 2003 for an F****grade MDF (also known as Super EO).Transport:Grown / processed in New Zealand.Available:Nelson Pine Ltd. www.nelsonpine.co.nzProcessing Energy: Processing plant powered with waste wood fuel.Treatment required: None.Surface Finishing: Low VOC Paint.Finish / Maintenance: Should not be used externally or in areas which are frequently damp. LifeExpectancy as per Resene “Expected Life System Chart”- SC1 New and SC2 Repaint cosmetic only – 10yrs- SC3 – repaint with wear and tear – 5 yrsPaint finishDescription:Interior timber surface, waterborne flat1 coat:Resene Quick Dry, waterborne primer /undercoat2 coat:Resene Ceiling Paint, waterborne flat3 coat:Resene Ceiling Paint, waterborne flatSystem meets Green Star IEQ 13 requirements as at 15/05/08Page 13 of 21 May 2008
- Page 115 and 116: - 115 -Figure 9.2 shows that the ne
- Page 117 and 118: - 117 -placing and retaining materi
- Page 119 and 120: - 119 -Net CO 2 emissions - that is
- Page 121 and 122: - 121 -The LVL specified for the st
- Page 123 and 124: - 123 -10 ConclusionsThe following
- Page 125 and 126: - 125 -building types, instead subs
- Page 127 and 128: - 127 -In summary, reutilisation sh
- Page 129 and 130: - 129 -• What is the ranking of t
- Page 131 and 132: - 131 -• What is the comparison i
- Page 133 and 134: - 133 -Connell Wagner (2007): Combu
- Page 135 and 136: - 135 -Suzuki, Michiya, and Tatsuo
- Page 137 and 138: - 137 -C O N C R E T E B U I L D I
- Page 139 and 140: - 139 -S T E E L B U I L D I N Gm m
- Page 141 and 142: - 141 -T I M B E R B U I L D I N Gm
- Page 143 and 144: - 143 -T I M B E R B U I L D I N G
- Page 145 and 146: - 145 -T Exterior Wall Cladding 581
- Page 147 and 148: - 147 -Appendix B. Life times of bu
- Page 149 and 150: - 149 -Appendix D: Transport scenar
- Page 154 and 155: - 151 -Appendix F: Warren and Mahon
- Page 156 and 157: Timber Plus ProjectSummary of the T
- Page 158 and 159: Timber Plus ProjectGreen Star Ratin
- Page 160 and 161: Timber Plus ProjectVolatile Organic
- Page 162 and 163: Timber Plus ProjectThe Forest Stewa
- Page 164 and 165: Timber Plus ProjectStain and Clear
- Page 168 and 169: Timber Plus ProjectWINDOW REVEALSMa
- Page 170 and 171: Timber Plus ProjectSOFFIT FRAMINGMa
- Page 172 and 173: Timber Plus ProjectEXTERIOR WALL CL
- Page 174 and 175: Timber Plus ProjectAdditional Oppor
- Page 176 and 177: Appendix AResene Expected Paint Sys
- Page 178 and 179: - 152 -Appendix G: Green Star Asses
- Page 180 and 181: New Zealand Forest Research Institu
- Page 182 and 183: Executive SummaryA common building
- Page 184 and 185: 1 IntroductionA common building des
- Page 186 and 187: Timber pluso The same assumptions a
- Page 188 and 189: Table 1-1-1: Weightings in Green St
- Page 190 and 191: The science behind LCA is still dev
- Page 192 and 193: In comparison the LCA results have
- Page 194 and 195: All four buildings in this research
- Page 196 and 197: 1.4 Further WorkThe difficulty in m
Timber Plus Project15 MDFMaterial:Species:VOC Emissions:Transport:Available:Processing Energy:Treatment required:Surface Finishing:Finish / Maintenance:Medium density fibreboard (MDF).Pinus Radiata (plantation grown).GoldenEdge MDF is manufactured using phenol formaldehyde. It is certified ascomplying with the Japanese Industrial Standard JIS A5905 2003 for an F****grade MDF (also known as Super EO).Grown / processed in New Zealand.Nelson Pine Ltd. www.nelsonpine.co.nzProcessing plant powered with waste wood fuel.None.Low VOC Paint.Should not be used externally or in areas which are frequently damp. Lifeexpectancy <strong>of</strong> coatings as per Resene “Expected Life System Chart”- SC1 New and SC2 Repaint cosmetic only – 10yrs- SC3 – repaint with wear and tear – 5 yrsPaint finishDescription:Interior timber surface, waterborne low sheen1 coat:Resene Quick Dry, waterborne primer /undercoat2 coat:Resene Zylone Sheen VOC FREE, waterborne low sheen3 coat:Resene Zylone Sheen VOC FREE, waterborne low sheenSystem meets Green Star IEQ 13 requirements as at 15/05/0817 MDF CEILING TILESMaterial:Medium density fibreboard (MDF).Species:Pinus Radiata (plantation grown).VOC Emissions: GoldenEdge MDF is manufactured using phenol formaldehyde. It is certified ascomplying with the Japanese Industrial Standard JIS A5905 2003 for an F****grade MDF (also known as Super EO).Transport:Grown / processed in New Zealand.Available:Nelson Pine Ltd. www.nelsonpine.co.nzProcessing Energy: Processing plant powered with waste wood fuel.Treatment required: None.Surface Finishing: Low VOC Paint.Finish / Maintenance: Should not be used externally or in areas which are frequently damp. LifeExpectancy as per Resene “Expected Life System Chart”- SC1 New and SC2 Repaint cosmetic only – 10yrs- SC3 – repaint with wear and tear – 5 yrsPaint finishDescription:Interior timber surface, waterborne flat1 coat:Resene Quick Dry, waterborne primer /undercoat2 coat:Resene Ceiling Paint, waterborne flat3 coat:Resene Ceiling Paint, waterborne flatSystem meets Green Star IEQ 13 requirements as at 15/05/08Page 13 <strong>of</strong> 21 May 2008