blackmagic atem 1 m/e production switcher - Imagecraft

53
Operating Your ATEM Switcher
Transition
Mix Dip FTB
1:00 1:00 1:00
Set Rate Set Rate Set Rate
To perform a mix transition on the broadcast panel
Step 1. On the preview bus, select the video source that you want on the program output.
Step 2. Press the MIX/DIP button to select the mix transition type. The system control automatically
navigates to the transition menu. To manually navigate to the transition menu press HOME >
TRANS.
Step 3. In the transition menu, use the knob to adjust the mix rate. The transition rate display in the
transition control block will update dynamically. You can also enter a rate duration using the
number pad followed by the set rate button.
Step 4. Perform the transition as an auto transition or manual transition from the transition control block.
Mix Transition Parameters
Mix The mix transition rate in seconds : frames.
Dip Transitions
A DIP is similar to a mix in that it is a gradual transition that transitions from one source to another. However,
a dip transition gradually mixes through a third source, the dip source. For example, the dip transition
can be used for a transition that calls for a white flash or a transition that quickly flashes the sponsor logo.
The length of the dip transition and the dip source can both be customized.
Program output for a dip transition.