blackmagic atem 1 m/e production switcher - Imagecraft
blackmagic atem 1 m/e production switcher - Imagecraft
blackmagic atem 1 m/e production switcher - Imagecraft
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
47<br />
Operating Your ATEM Switcher<br />
Cut Transitions<br />
The cut is the most basic transition that can be performed on the <strong>switcher</strong>. In a cut transition the program<br />
output is immediately changed from one source to another.<br />
Program output for a cut transition.<br />
A cut transition can be performed directly from the program bus, or using the CUT button in the transition<br />
control block.<br />
Program Bus<br />
When a cut transition is performed from the program bus, only the background will be changed, and all<br />
upstream and downstream keys will maintain their current state.<br />
To perform a cut transition from the program bus on the software control panel<br />
Step 1. On the program bus, select the video source that you want on the program output. The program<br />
output will immediately change to the new source.<br />
To perform a cut transition on the software control panel using a keyboard<br />
Step 1. Enable or press and hold the key.<br />
Step 2. Press the number key on the keyboard corresponding to the video source that you want on the<br />
program output. The program output will immediately change to the new source.<br />
To perform a cut transition from the program bus on the broadcast panel<br />
Step 1. On the program bus, select the video source that you want on the program output. The program<br />
output will immediately change to the new source.