Easidew Datasheet - SRP Control Systems
Easidew Datasheet - SRP Control Systems
Easidew Datasheet - SRP Control Systems
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Humidity and Dew-Point InstrumentsPrecision Manufacturing<strong>Easidew</strong> Transmitter2-Wire Dew-Point TransmitterThe <strong>Easidew</strong> Transmitter is designed for ease of use,incorporating all the features needed to make installationand operation as simple as possible. For the first time, dewpointmeasurement is made as accessible as temperatureand pressure with this fully configured, calibratedtransmitter that can be instantly incorporated into your airor gas management and control system.Highlights• 2-wire loop powered connection• Dew point or ppm moisture content• IP66 (NEMA 4)• Excellent sensor protection• Measurement range -100 to +20°C / -148 to +68°F• Operating temperature -40 to +60°C / -40 to +140°F• Fast responseDimensionsTechnical SpecificationsMeasurement range (dewpoint)Accuracy (dew point)Response timeRepeatabilityOutput signalSupply voltageLoad resistanceCurrent consumptionSupply voltage influenceOperating humidityOperating temperatureOperating pressureFlow ratePerformance-100 to +20°C / -148 to +68°F dewpoint±2°C / 3.6°F dew point5 mins to T95 (dry to wet)0.5°C / 0.9°F dew pointElectrical output/input4-20 mA (2-wire) current source,configurable over the entire rangeDew point -100 to + 20°C-150 to +70°F0 - 3000 ppm vppm voutput or non-standard dew-pointrange must be specified at time oforder12–28 VDCMax 250 Ω @ 12 V500 Ω @ 24 V23 mA max (fault condition)±0.005% RH/VOperating conditions0–100% RH-40 to +60°C / -40 to +140°F6500 psi / 450 bar g max
Options and accessoriesPanel Meter An economical panel or benchmountedmeter with digital display, analog outputsand dual alarm relays. Display and outputconfigurable as dew point (°C or °F) or ppmmoisture content.<strong>Easidew</strong> Sampler A self-contained samplingsystem, with filtration and flow control, formeasurement of pressure or atmospheric dew pointSample Block Stainless Steel sample block tocontain <strong>Easidew</strong> Transmitter, with 1/8” NPT portsReplacement HDPE Guard Pack of 10 HDPEGuardsSintered Guard Stainless Steel sintered guard, forprotection of ceramic sensor (in place of standardHDPE Guard)<strong>Easidew</strong> Communication Kit For connection to<strong>Easidew</strong> Transmitter and reconfiguration of rangeand output via Michell Configuration Software(available free of charge from Michell)EA2-OL-100EA2-SAMCSBEA2-HDPE-109980237EA2-CKHumidity and Dew-Point Instruments<strong>Easidew</strong> TransmitterElectrical Connections4-20mA connections 2-wirePin 14-20 mAPin 3POWERPrecision ManufacturingOrder codes2-wire dew-point transmitterEA2-TXNon-standard zeroDew point at 4 mA outputNon-standard full scaleDew point at 20 mA outputEngineering UnitsUnits (C= °Cdp; F= °Fdp;P= ppm v)Process Pressure other thanatmospheric (if any)Pressure for ppm vconversion inbarg or psig. Blank = 0 barg /0 psigFilter materialHDPE (standard)Sintered stainlessHDSSExample:Standard product: EA2-TX-150-HD2-wire dew-point transmitter, <strong>Easidew</strong> TX with measurement range of -150 to +70F dew point corresponding to 4-20mA outputNon-standard product: EA2-TX -120 +50 F 50psig HD2-wire dew-point transmitter, <strong>Easidew</strong> TX with measurement range of -120 to +50F dew point corresponding to 4-20mA output to operate at a processpressure of 50 psig.Please note: Michell Instruments adopts a continuous development program which sometimes necessitates specification changeswithout notice. Please contact us for latest version. Ref: <strong>Easidew</strong>_0908Process Measurement & <strong>Control</strong>s11 Old Sugar Hollow RoadDanbury, CT 06810 USAEmail: sales@pmc1.comWeb: www.pmc1.comTel: 203-792-868622Represented by: