MW8CX/MW10C Owner's Manual

More documents

Recommendations

Info

Introduction12Before Turning on the MixerBe sure that the mixer’s power switch is in theSTANDBY position.CAUTIONUse only the included power adaptor (PA-10) oran equivalent recommended by Yamaha. Use of adifferent adaptor may result in equipment damage,overheating, or fire.Connect the power adaptor to the AC ADAPTOR INconnector (q) on the rear of the mixer, and thenturn the fastening ring clockwise (w) to secure theconnection.wqComputer System RequirementsWindows VistaComputerOSCPUMemoryWindows XPComputerOSCPUMemoryMacintoshWindows-based computer with built-in USB interfaceWindows Vista1 GHz or higher Intel Core/Pentium/Celeron processor1 GB or moreWindows-based computer with built-in USB interfaceWindows XP Professional/XP Home Edition750 MHz or higher Intel Core/Pentium/Celeron processor96 MB or more (128 MB or more recommended)3Plug the power adaptor into a standard householdpower outlet.CAUTION• Be sure to unplug the adaptor from the outletwhen not using the mixer, or when there arelightning storms in the area.• To avoid generating unwanted noise, makesure there is 50 cm or more between the poweradaptor and the mixer.ComputerOSCPUMemoryMacintosh computer with built-in USB interfaceMacOS X 10.3.3 or higherMacintosh G3 300 MHz or higher/Intel processor128 MB or moreCubase AI4 System RequirementsTurning the Power On/OFFPress the mixer’s power switch to the ON position.When you are ready to turn the power off, press thepower switch to the STANDBY position.CAUTIONNOTENote that trace current continues to flow while theswitch is in the STANDBY position. If you do not planto use the mixer again for a long while, please be sureto unplug the adaptor from the wall outlet.To prevent loud pops and noises, turn on the power toyour sound gear starting with the sources (instruments,CD players, etc.) and ending with the power amplifier orpowered speakers.Example : Instruments, microphones, and CD playersfirst, then the mixer, and finally the poweramplifier or powered speakers.When turning off the power to the system, reverse theorder described above.WindowsOSCPUMemoryAudioInterfaceHard DiskMacintoshOSCPUMemoryHard DiskNOTEWindows XP Professional/XP Home Edition1.4 GHz or higher Intel Pentium processor512 MB or moreWindows DirectX compatible400 MB or moreMacOS X 10.4 or higherPower Mac G4 1 GHz/Core Solo 1.5 GHz or higher512 MB or more400 MB or more•A DVD driver is required for installation.•To activate your software license, install the applicationwhile the computer is connected to the internet.6MW8CX/MW10C Owner’s Manual
Mixer BasicsQuick GuideMixer BasicsThis quick setup and operation guide covers everything from installing the Cubase AI4 software tousing Cubase AI4 for recording and mixdown. While going through this section you might find ituseful to also refer to the “Front and Rear Panels” section on page 16, as well as the pdf manualsupplied with the Cubase AI4 software.Step1 Installing Cubase AI4IMPORTANT !Since the End-User Software License Agreement (EUSLA) shown on your PC-display in yourinstalling the “DAW” software is replaced by the agreement at the end of this manual, youshould disregard the EUSLA. Read the Software License Agreement at the end of this manualcarefully, and install the software if you agree to it.123Start the computer and log on to the Administrator account.Insert the included DVD-ROM into the computer’s DVD-ROM drive.Open the “Cubase AI 4 for Windows” folder and double-click on the “CubaseAI4.msi”.Follow the on-screen instructions to install the Cubase AI4 software.NOTE• When installing Cubase AI4, you will need a working internet connection to register your Cubase AI4. Makesure to fill in all required fields for user registration. If you do not register the product, you will be unable to usethe application after a limited period of time expires.•For a Macintosh computer, double-click the “CubaseAI4.mkpg” icon for installation.Step12 Connecting to the MW mixerTurn the power to the MW mixer and allgear that is to be connected to the MWmixer off/standby (except the computer),and set the LEVEL controls and STEREOMaster control to their minimum settings.2Connect the MW mixer to your computerusing the supplied USB cable.USB Connection PrecautionsBe sure to observe the following points when connecting tothe computer’s USB interface.Failure to observe these rules can result in computer freezes/hang-ups and possibly data loss or corruption. If the MWmixer or computer does hang up, turn the power to bothdevices off and then on again, and restart the computer.LEVEL controlsCAUTION• Be sure to wake the computer from sleep/suspended/standbymode before making a connectionto the computer’s USB connector.• Connect the MW mixer to the computer beforeturning the MW mixer power on.• Always quit all applications running on thecomputer before turning the MW mixer’spower on or off, or connecting or disconnectingthe USB cable.• Wait at least 6 seconds between turning theMW mixer on or off, and between connectingor disconnecting the USB cable.STEREO Master controlCAUTIONNOTEWhen connecting or disconnecting the USBcable be sure to turn the 2TR IN/USB controlall the way down.Disconnect the USB cable when using the MWmixer without the computer.MW8CX/MW10C Owner’s Manual 7
Page 1 and 2: EnglishOwner’s ManualBedienungsan
Page 3 and 4: PRECAUTIONSPLEASE READ CAREFULLY BE
Page 5: IntroductionThank you for choosing
Page 9 and 10: Mixer BasicsQuick GuideStep4 Adjust
Page 11 and 12: Mixer BasicsQuick Guide4On a Window
Page 13 and 14: Mixer BasicsQuick Guide4To hear pla
Page 15 and 16: ReferenceReferenceSetupSynthesizerP
Page 17 and 18: ReferenceFront & Rear Panels6 GAIN
Page 19 and 20: ReferenceFront & Rear Panels9 RETUR
Page 21 and 22: ReferenceFront & Rear PanelsDigital
Page 23 and 24: ReferenceTroubleshootingThe sound i
Page 25 and 26: ReferenceSpecifications■ Analog I
Page 27 and 28: ReferenceSpecifications■ Block Di
Page 29 and 30: 2. RESTRICTIONS• You may not enga
Page 31 and 32: 2. BESCHRANKUNGEN• Sie dürfen ni
Page 33 and 34: 2. RESTRICTIONS• Vous ne pouvez e
Page 35 and 36: 2. RESTRICCIONES• No puede somete

MW8CX/MW10C Owner's Manual

Create successful ePaper yourself

Delete template?

Save as template?