CV11 - Total Hydraulics BV

More documents

Recommendations

Info

ContentsPage 3Page 4Page 5-7Page 8-9Page 10Page 11-13Page 14Page 15General InformationTechnical dataSpool OptionsSpool ControlsPerformance CurvesAssembly DimensionsAccessoriesOrder CodeDirectional Control Valve 2Series CV 112
General InformationThe CV 112 Special Loader Valve has been designed to fit all loaders with a flow rate up to 50 l/min or 12GPM and a maximum pressure of 320 bar or 4600 psi.The CV 112 can be operated both in loaders with either open Center systems or LS systems depending onits build configuration.The CV 112 Special Loader Valve offers the loader builder a number of key features to enhance the loaderperformance such as :• Exceptional Low Spool leakage rates (less than 2 cc/min or 0.122 inch 3 /min).• Load Check valves on each spool.• Direct Acting Main Relief Valve for fast response to system over pressure.• Float Function for the lowering circuit.• Regen Function for the tilt circuit.• DIRECT MOUNTED JOYSTICK for both float and regen.• Cable Control option.• Power Beyond option.• BSP and SAE Threads are standard but also Metric and NPTF can be offered upon request.Directional Control Valve 3Series CV 112
Page 4 and 5: Technical DataMax pressure settingM
Page 6 and 7: Spool OptionsSPOOLS FOR LOAD SENSIN
Page 8 and 9: Spool ControlsJoystick Specificatio
Page 10 and 11: Performance CurvesDirectional Contr
Page 12 and 13: Assembly CV 110 DimensionsAssembly
Page 14: essoriesh pressure carry-over adapt

CV11 - Total Hydraulics BV

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?