Quidway AR 28 Series Routers Installation Manual.pdf - Index of

Installation ManualQuidway AR 28 Series RoutersChapter 6 Router Maintenance1: Change Net Parameter2: Download From Net3: Exit to Main MenuEnter your choice(1-3):1III. Configure parametersSelect in NET download menu to turn to parameter configuration interface.Change Boot Parameter:'.' = clear field; '-' = go to previous field; ^D = quitboot device: fei0processor number : 0host name : 8040file name: M8240ram.arjinet on ethernet (e) : 169.254.10.10inet on backplane (b):host inet (h) : 169.254.10.11gateway inet (g) :user (u) : 8040ftp password (pw) (blank = use rsh):flags (f): 0x0target name (tn) :startup script (s) :other (o) :1) Configure these parameters for TFTP modefile name: File name to be loadedinet on ethernet (e): IP address for the Ethernet port for loadinghost inet (h): IP address for TFTP Serverflags (f): The flag must be 0x80 for TFTP mode2) Configure these parameters for FTP modefile name: File name to be loadedinet on ethernet (e) : IP address for the Ethernet port for loadinghost inet (h) : IP address for FTP Serveruser (u): User name, which must be consistent with that for FTP Serverftp password (pw) (blank = use rsh): Password, which must be consistent with that forFTP Serverflags (f): The flag must be 0x0 for FTP modeThese parameters will be saved automatically when your configuration is completed.6-9