Quidway AR 28 Series Routers Installation Manual.pdf - Index of

Installation ManualQuidway AR 28 Series RoutersChapter 6 Router MaintenanceStep 3: When the sub-menu appears again, select to exit the Boot menu andproceed to execute the router’s main software.II. Restore the extended segment of Boot ROM program from FLASHIn case that faults occur to the extended segment of the Boot ROM program that is inuse or you upgrade the extended segment wrongly, you can restore the extendedsegment saved in FLASH into the Boot ROM by doing the following:Step 1: Enter Boot menu, select to turn to Boot ROM operation menu.Step 2: Select in the operation sub-menu to restore Boot ROM from FLASH, andthen the following information will be displayed if the restoring operation is successful.Writing to Boot ROM.Please wait...######Restoring Boot ROM program successed!Step 3: When the sub-menu appears again, select to exit the Boot menu andproceed to execute the router’s main software.6.1.4 Upgrading Application Program with EthernetIt refers to downloading application program through Ethernet port. The router servesas client, so it needs to be connected to TFTP Server or FTP Server through its fixedEthernet port. The following are the details.Caution:TFTP Server or FTP Server program is not included in Quidway AR 28 Series Routers, so you have to buyand install it.Both TFTP loading and FTP loading are available in AR 28 Series Routers.I. Start TFTP or FTP ServerStart TFTP server or FTP server at the PC connecting the Ethernet port of the routerand configure path for the files to be loaded. For FTP Server, you should also setusername and password.II. Enter NET download menuSelect in BOOT menu to turn to NET download menu.Net Port Download Menu:6-8