Quidway AR 28 Series Routers Installation Manual.pdf - Index of

Installation ManualQuidway AR 28 Series RoutersChapter 6 Router MaintenanceEnter your choice(1-6):Step 2: Select an appropriate download speed. For example, enter to select thedownload speed 115200 bps and the router will prompt:Download speed is 115200 bps. Change the terminal's speed to 115200 bps, andselect XModem protocol. Press ENTER key when ready.Step 3: According to the above information, change the baud rate set at the consoleterminal (refer to Figure 5-4) for keeping it in consistency with the selected softwaredownload baud rate. After that, disconnect the terminal (that is [Dial-in/Disconnect]),reconnect it (that is [Dial-in/Dialing]) and then press to begin downloading. Thesystem will prompt:Downloading ... CCCCC Note:After the baud rate at the console terminal is set, the new setting can become valid only if the terminalemulation program is disconnected and reconnected for at least once.Step 4: Select [Transmit/send file] in the terminal window and the following dialog boxwill pop up:Figure 6-1 Send File dialog boxStep 5: Click , select the application file to be downloaded, and set theprotocol to Xmodem. Then click , and the system will pop up the followinginterface:6-5