Quidway AR 28 Series Routers Installation Manual.pdf - Index of

More documents

Recommendations

Info

$t.-l ,\l$

Installation ManualQuidway AR 28 Series RoutersChapter 5 Startup and Configuration of the RouterSLOT3SLOT2SLOT1SLOT0Figure 5-8 Sequence of the slots on AR 28-312) Interface numberingIn VRP3.3, interfaces are numbered with the “two-dimension” approach, following therules listed below:• Interface number is represented in the form of “interface X/Y”, with “interface”indicating the interface type, which can be serial, asynchronous, Ethernet, or anyother type, X indicating the slot number, and Y the interface sequence number.• As shown in the above figure, the interfaces on the same interface module havethe same slot number (X).• The interfaces of each type are numbered starting at 0.• These interfaces are numbered according to the sequence numbers on theinterface module, from left to right.Suppose a 2SA module and a 2S1B module are respectively installed in SLOT0 andSLOT1 on AR 28-80. The serial interfaces will be sequenced as follows:• The serial interfaces on the 2SA module are respectively numbered Serial 0/0 andSerial 0/1.• The serial interfaces on the 2S1B module are respectively numbered Serial 1/0,and Serial 1/1.Each interface can be configured in a particular view. For more information aboutinterface configuration, refer to VRP3 Operation Manual.5-9
Installation ManualQuidway AR 28 Series RoutersChapter 6 Router MaintenanceChapter 6 Router Maintenance6.1 IntroductionThe files managed by the Router are of 3 types:• Boot ROM program files used by the Router to boot the application program files• Application files (main software)• Configuration filesThis chapter will introduce you with three methods:• Application and Boot ROM programs upgrade via XModem• Application program upgrade via TFTP• Application program and configuration file upload/download via FTP6.1.1 Boot MenuBoot Menu:1: Download application program with XMODEM2: Download application program with NET3: Set application file type4: Display applications in Flash5: Clear configuration6: Clear application password7: Start up and ignore configuration8: Enter debugging environment9: Boot Rom Operation Menua: Do not check the version of the softwareb: Exit and rebootEnter your choice(1-9):Options of Boot menu are described as follows:1) Download application program with Xmodem. Refer to 6.1.2 UpgradingApplication Program and Boot ROM through XModem Protocol for details.2) Download application program with Ethernet. Refer to 6.1.4 UpgradingApplication Program with Ethernet for details.This option leads you into NET port download menu, which includes these options:Net Port Download Menu:1: Change Net Parameter2: Download From Net3: Exit to Main Menu6-1
Page 1 and 2:
Chapter 1 Overview ................
Page 3 and 4:
6.2.3 Replacing the DIMM ..........
Page 5 and 6:
Quidway AR 28 Series RoutersInstall
Page 7 and 8:
About This ManualVersionThis manual
Page 9 and 10:
II. GUI conventionsConventionDescri
Page 11 and 12:
Installation ManualQuidway AR 28 Se
Page 13 and 14: Installation ManualQuidway AR 28 Se
Page 63: Installation ManualQuidway AR 28 Se
Page 87: Installation ManualQuidway AR 28 Se
show all

Quidway AR 28 Series Routers Installation Manual.pdf - Index of

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?