Simrad SP90
Simrad SP90 Simrad SP90
Simrad SP90HorizontalThe Horizontal menu is used for the horizontal sonarpresentations. These are present in all display modes. When ahorizontal parameter setting is selected and defined in one mode,the chosen settings will automatically be applied to all modes.The following parameters are available:→ Range, page 117.→ Tilt, page 132.→ Bearing, page 87.→ Gain, page 102.→ Pulse Form, page 115.→ Tx Power, page 139.→ Ping Sector, page 113.→ Frequency, page 101.→ TVG (Time Variable Gain), page 138.→ AGC (Automatic Gain Control), page 85.→ RCG (Reverberation Controlled Gain), page 120.→ PP Filter, page 114.→ Audio volume, page 86.The Help button opens the on-line help.→ The on-line help is described on 51.58 850-164511 / B
Menu descriptionVerticalThe Vertical menu is only shown in modes with a vertical slicefunction. All relevant settings, except the TX Power, can beselected separately for the vertical modes independent of thehorizontal settings. When any vertical setting is selected anddefined in one mode, the setting will be applied to all verticalmodes.The following parameters are available:→ Range, page 117.→ Bearing (Vertical), page 89.→ Gain, page 102.→ Pulse Form, page 115.→ Tx Power, page 139.→ Frequency, page 101.→ TVG (Time Variable Gain), page 138.→ AGC (Automatic Gain Control), page 85.→ RCG (Reverberation Controlled Gain), page 120.→ PP Filter, page 114.→ Audio volume, page 86.The Help button opens the on-line help.850-164511 / B59
- Page 20 and 21: Simrad SP90Figure 460 degrees verti
- Page 22 and 23: Simrad SP90RCG (Reverberation Contr
- Page 24 and 25: Simrad SP902 DISPLAY MODES2.1 Intro
- Page 26 and 27: Simrad SP902.3 North UpWhen the Nor
- Page 28 and 29: Simrad SP902.5 180° /AudioWhen the
- Page 30 and 31: Simrad SP902.7 Bow Up / VerticalWhe
- Page 32 and 33: Simrad SP902.9 Dual 1The Dual mode
- Page 34 and 35: Simrad SP903 SONAR OPERATING PANEL3
- Page 36 and 37: Simrad SP90SymbolThe Symbol functio
- Page 38 and 39: Simrad SP90ModeMODEMode1Mode2Mode3M
- Page 40 and 41: Simrad SP90RangeRange controls are
- Page 42 and 43: Simrad SP90TrackballThe trackball c
- Page 44 and 45: Simrad SP90NoteTarget trackTo track
- Page 46 and 47: Simrad SP90VariousThe buttons group
- Page 48 and 49: Simrad SP904.2 Start and stop proce
- Page 50 and 51: Simrad SP904.3 Menu operationIntrod
- Page 52 and 53: Simrad SP90Figure 10Full screen pre
- Page 54 and 55: Simrad SP90Menu buttonsEach menu co
- Page 56 and 57: Simrad SP90Stored parametersDefault
- Page 58 and 59: Simrad SP904.5 CosmeticsThe choices
- Page 60 and 61: Simrad SP90Figure 16 Sonar display
- Page 62 and 63: Simrad SP90NoteHWID - This field di
- Page 64 and 65: Simrad SP905 MENU DESCRIPTIONS5.1 I
- Page 66 and 67: Simrad SP905.2 Menu structurePurpos
- Page 68 and 69: Simrad SP90MenusThe sonar contains
- Page 72: Simrad SP90DisplayThe Display menu
- Page 76: Simrad SP905.4 Temporary menusThe T
- Page 80 and 81: Simrad SP90Sort ModesThe Sort Modes
- Page 82 and 83: Simrad SP90Make Same SizeWhen Make
- Page 84 and 85: Simrad SP90To remove the ruler, cli
- Page 86 and 87: Simrad SP90GeoViewThe GeoView menu
- Page 88 and 89: Simrad SP90CatchViewThe CatchView m
- Page 90 and 91: Simrad SP90WarningsThe Warnings men
- Page 92 and 93: Simrad SP90System alarmsThe System
- Page 94 and 95: Simrad SP906 PARAMETERS6.1 About pa
- Page 96 and 97: Simrad SP90AboutThe About parameter
- Page 98 and 99: Simrad SP90Audio volumeThe Audio vo
- Page 100 and 101: Simrad SP90Auto -IntheAuto Search m
- Page 102 and 103: Simrad SP90Colour ThresholdThe Colo
- Page 104 and 105: Simrad SP90Data SourceThe Data Sour
- Page 106 and 107: Simrad SP90Direction IndicatorThe D
- Page 108 and 109: Simrad SP90Edit Gear (Purse)The Gea
- Page 110 and 111: Simrad SP90Edit schoolThe Edit Scho
- Page 112 and 113: Simrad SP90Fish alarmThe Fish Alarm
- Page 114 and 115: Simrad SP90GainThe Gain is accessed
- Page 116 and 117: Simrad SP90HeadingThe Heading param
- Page 118 and 119: Simrad SP90LanguageThe Language but
Menu descriptionVerticalThe Vertical menu is only shown in modes with a vertical slicefunction. All relevant settings, except the TX Power, can beselected separately for the vertical modes independent of thehorizontal settings. When any vertical setting is selected anddefined in one mode, the setting will be applied to all verticalmodes.The following parameters are available:→ Range, page 117.→ Bearing (Vertical), page 89.→ Gain, page 102.→ Pulse Form, page 115.→ Tx Power, page 139.→ Frequency, page 101.→ TVG (Time Variable Gain), page 138.→ AGC (Automatic Gain Control), page 85.→ RCG (Reverberation Controlled Gain), page 120.→ PP Filter, page 114.→ Audio volume, page 86.The Help button opens the on-line help.850-164511 / B59