Simrad SP90

ParametersEdit Gear (Trawl)The Gear parameter dialogue is accessed on the Setup menu. Eachof the available options in the Gear dialogue can be edited usingthe Edit button. When a trawl has has been selected, this parameterdialogue is provided.→ The Gear parameter dialogue is explained on page 103.These parameters allows you to monitor or define the distance anddepth of your trawl, as well as the height and width of your trawlopening. If you use the Simrad ITI system, these parameters willbe provided automatically.The following options are available:Distance - Set the distance to the trawl manually, or automaticallyif the ITI Trawl system is connected.Depth - Set the depth of the trawl manually, or automatically if theITI Trawl system is connected.Height -Set the height of the trawl opening, or automatically if theITI Trawl system is connected.Width - Set the width of the trawl opening manually, orautomatically if the ITI Trawl system is connected.Length - Set the length of the trawl symbol.Each parameter is defined in a separate dialogue.850-164511 / B97