Adobe .PDF - Thompson Center Arms

BulletMag ExpressSabotAssembledSabotLoaded SabotThe AssembledSabot Must BeSeated FirmlyOn The PowderCharge.Use only bullets of the correct diameter that were designed for the sabotsyou are using. Using bullets of lesser diameter may cause the bullet to separatefrom the sabot resulting in a barrel obstruction. Using bullets of largerdiameter could result in difficult loading, or a condition where the sabotis not seated all the way down on the powder charge, resulting in a barrelobstruction. EITHER CASE CAN RESULT IN A DAMAGEDFIREARM AND POSSIBLE INJURY AND/OR DEATH TO THE SHOOT-ER OR BYSTANDERS AND DAMAGE TO PROPERTY.The photo on page 26 pictures a shooter in the process of loading a muzzleloadingrifle. Study this photo carefully and read all the captions before youproceed to charge your rifle.The complete sabot unit should be seated firmly on the powder charge asindicated in the illustration below.Do not exceed the recommended loading data in this manual when usingT/C Mag Express Sabots in Thompson/Center rifles. When using rifles notmanufactured by Thompson/Center, do not exceed the recommended loadsprovided by the manufacturer of your rifle.84