Adobe .PDF - Thompson Center Arms

For Use With .54 CaliberT/C Muzzleloading RiflesUse No.11 Percussion Cap, Musket Cap orT/C Flint with 4F (FFFFG) Priming Powder.54 Caliber RifleBlack Powder &Break-O-Way Sabot LoadsFor Use With.429" - .430" Bullets200 GrainBullet240 GrainBulletBlack PowderCharge (Grains)Muzzle Velocity(Feet Per Second)Muzzle Energy(Foot Pounds)90 grs. FFG 1652 F.P.S. 1212 Ft. Lbs.100 grs. FFG 1709 F.P.S. 1297 Ft. Lbs.110 grs. FFG 1795 F.P.S. 1431 Ft. Lbs.120 grs. FFG 1871 F.P.S. 1555 Ft. Lbs.90 grs. FFG 1620 F.P.S. 1399 Ft. Lbs.100 grs. FFG 1662 F.P.S. 1472 Ft. Lbs.110 grs. FFG 1728 F.P.S. 1592 Ft. Lbs.Load Shown in Red is MaximumAssembly and Loading ofT/C Mag Express SabotsT/C Mag Express Sabots come in several variations for .50 caliber muzzleloadingapplications; some accept 44 caliber (.429” - .430” diameter) bullets andothers accept 45 caliber (.451” - .452” diameter) bullets. In either case, insertthe correct diameter projectile into the sabot and press firmly, making sure thebullet is fully seated.When loading T/C’s Mag Express Sabots, make sure that your gun isunprimed, and that your Mag Express Sabot has been properly assembled.Failure to assemble and load your sabot correctly could result in the bulletdisengaging from the sabot. This could result in an air space between thecomponents. Under such a condition, one or more of the components mayact as a barrel obstruction and firing could result in a damaged firearm andPOSSIBLE INJURY AND/OR DEATH TO THE SHOOTER ORBYSTANDERS AND DAMAGE TO PROPERTY.To properly assemble your T/C Mag Express Sabot, insert the projectileinto the sabot and press firmly, making sure the bullet is fully seated. Use onlybullets of the correct diameter.83