TruVision DVR 60 User Manual - Interlogix

11BChapter 12: Configuring alarm settingsFigure 36: Mouse pop-up menu for motion detection mode1. Full screen: Select the whole screen to be sensitive to motion detection.2. Clear All: Clear all motion detection areas on-screen.3. Sensitivity: Set the motion sensitivity level. There are five sensitivity levels: 0 (lowest) to 5 (highest).4. Target size: Set the minimum number of zones in a camera image that must be activated simultaneously before it isconsidered to be valid motion. The value can be between 0 and 255 squares.5. Exit: Return to the Advanced Camera Settings screen.For analog cameras you can set up both the schedule and areas sensitive tomotion detection for each camera individually or easily copy the settings of onecamera to other cameras.For IP cameras you can configure from the DVR the schedule when the cameracan be triggered by motion. However, you need to configure the area of the videodisplay sensitive to motion from the camera itself.Note: For motion detection to work best the light in a camera area should beconstant, and the background of the camera image should preferably be highcontrast.Description of alarm notification typesWhen setting up the alarm rules for motion detection, you can specify how youwant the DVR to notify you about an alarm. You can select more than onenotification type.88 TruVision DVR 60 User Manual