TruVision DVR 60 User Manual - Interlogix

10BChapter 11: Configuring recording settingsThe Locked column indicates whether a file is locked or not. Closed lockicons indicate locked files while opened lock icons indicate unlocked files. TheLock button toggles between Lock and Unlock, depending on the file.6. Click Cancel to exit out of the Video Search menu.Setting the HDD to read-onlyWhen you set an HDD to read-only, recorded video files cannot be written to theHDD. If multiple HDDs are used, the DVR automatically records to the next HDDnot set to read-onlyTo set a HDD to read-only:1. Enter the HDD Management screen by selecting System, and then HardDisk from the main menu.2. Click the General tab.3. Select the HDD you want to set to read-only.4. Click Mode. The Mode screen displays.5. Select Read-Only.6. Click OK to save your changes. The HDD is now read-only.Note: In order to enable recordings on that particular HDD again, you mustset the HDD status back to R/W (Read/ Write) in the HDD Mode screen.Configuring advanced HDD settingsTo prepare for any unexpected failures of hard disk drives, we recommend thatyou make a back up of your HDD. You must have more than one HDD in yourDVR to set up HDD redundancy.To set up HDD redundancy:1. Enter the HDD Management screen by selecting System, and then HardDisk from the main menu.2. Click the General tab.84 TruVision DVR 60 User Manual