TruVision DVR 60 User Manual - Interlogix
TruVision DVR 60 User Manual - Interlogix TruVision DVR 60 User Manual - Interlogix
6BChapter 7: Controlling a PTZ cameraTo set up a preset tour:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the front panel joystick for Enter.The PTZ control panel appears.2. Click the Preset Tour button on the PTZ control panel. The PTZ Controlscreen appears with the Preset Tour tab open.3. In the Preset Tour No. box select a preset tour to set.4. In the list of presets, select the desired pre-programmed presets.5. Click the Set button to enter the preset tour configuration menu. A preset tourshould have at least two enabled presets.6. Set the step number, dwell time, and speed.7. Click the OK button to return to the preset tour configuration men.8. Repeat steps 2 to 7 to configure other steps.9. After all steps have been configured, click OK to save and return to PTZmode.To delete a preset tour:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the front panel joystick for Enter.The PTZ control panel appears.2. Click the Preset Tour button on the PTZ control panel. The PTZ Controlscreen appears with the Preset Tour tab open.3. Select a preset tour number and click the Clear button.Note: The Clear All button deletes all presets.4. Click the OK button to save changes and return to PTZ mode.Setting a shadow tourThe Shadow Tour function remembers the PTZ dome camera movement track.Only one shadow tour can be set up.Note: The PTZ dome camera must be able to support a shadow tour function.To set up a shadow tour:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.52 TruVision DVR 60 User Manual
6BChapter 7: Controlling a PTZ camera- Or -Press the front panel joystick for Enter.The PTZ control panel appears.2. Click the Shadow Tour button on the PTZ control panel. The PTZ Controlscreen appears with the Shadow Tour tab open.3. Select the shadow tour number from the list displayed.Note: There is only one shadow tour.4. To record a new shadow tour, click the Run Shadow button to start recordingof the movements of the PTZ. Use the PTZ control panel to move the camera.The camera movements will be recorded until the Stop Running button isclicked.5. Click the OK button to save and return to PTZ mode.Calling up a preset positionPresets are previously defined locations of a PTZ dome camera. It allows you toquickly move the PTZ dome camera to a desired position. You must be in livemode to call up presets.Note: Only enabled presets can be called up and deleted.To call up a preset using the mouse:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu. The PTZ control panelappears.2. Click the Preset button on the PTZ control panel. The PTZ Control screenappears with the Preset tab open.3. Select a preset number and click the Call button.4. Click OK. The camera immediately moves to that preset position.To call up a preset using the front panel:1. Enter PTZ mode pressing the joystick for Enter on the front panel. The PTZcontrol panel appears.2. Click the Preset button on the front panel.3. Enter a preprogrammed preset number. The camera immediately moves tothat preset position.TruVision DVR 60 User Manual 53
- Page 8 and 9: 0BChapter 1: Product introductionFe
- Page 10: 0BChapter 1: Product introduction4
- Page 13 and 14: 1BChapter 2: InstallationFigure 1:
- Page 15 and 16: 1BChapter 2: InstallationFigure 2:
- Page 18 and 19: 1BChapter 2: InstallationCameraSwit
- Page 20 and 21: 1BChapter 2: InstallationUse an RS-
- Page 22 and 23: 1BChapter 2: InstallationBracketsTh
- Page 24 and 25: 1BChapter 2: Installation18 TruVisi
- Page 26 and 27: 2BChapter 3: Getting startedAny cha
- Page 28 and 29: 2BChapter 3: Getting startedCheck b
- Page 30 and 31: 3BChapter 4: Operating instructions
- Page 32 and 33: 3BChapter 4: Operating instructions
- Page 34 and 35: 3BChapter 4: Operating instructions
- Page 36 and 37: 3BChapter 4: Operating instructions
- Page 38 and 39: 3BChapter 4: Operating instructions
- Page 40 and 41: 4BChapter 5: Live modeFigure 13: Di
- Page 42 and 43: 4BChapter 5: Live modeTable 10: Pop
- Page 44 and 45: 4BChapter 5: Live modeItem Name Des
- Page 46 and 47: 5BChapter 6: Configuring the live m
- Page 48 and 49: 5BChapter 6: Configuring the live m
- Page 50 and 51: 5BChapter 6: Configuring the live m
- Page 52 and 53: 5BChapter 6: Configuring the live m
- Page 54 and 55: 6BChapter 7: Controlling a PTZ came
- Page 56 and 57: 6BChapter 7: Controlling a PTZ came
- Page 60 and 61: 6BChapter 7: Controlling a PTZ came
- Page 62 and 63: 7BChapter 8: Playing back a recordi
- Page 64 and 65: 7BChapter 8: Playing back a recordi
- Page 66 and 67: 7BChapter 8: Playing back a recordi
- Page 68 and 69: 7BChapter 8: Playing back a recordi
- Page 70 and 71: 7BChapter 8: Playing back a recordi
- Page 72 and 73: 8BChapter 9: Archiving recorded fil
- Page 74 and 75: 8BChapter 9: Archiving recorded fil
- Page 76 and 77: 8BChapter 9: Archiving recorded fil
- Page 78 and 79: 9BChapter 10: Using the Web browser
- Page 80 and 81: 9BChapter 10: Using the Web browser
- Page 82 and 83: 9BChapter 10: Using the Web browser
- Page 84 and 85: 9BChapter 10: Using the Web browser
- Page 86 and 87: 10BChapter 11: Configuring recordin
- Page 88 and 89: 10BChapter 11: Configuring recordin
- Page 90 and 91: 10BChapter 11: Configuring recordin
- Page 92 and 93: 10BChapter 11: Configuring recordin
- Page 94 and 95: 11BChapter 12: Configuring alarm se
- Page 96 and 97: 11BChapter 12: Configuring alarm se
- Page 98 and 99: 11BChapter 12: Configuring alarm se
- Page 100 and 101: 11BChapter 12: Configuring alarm se
- Page 102 and 103: 11BChapter 12: Configuring alarm se
- Page 104 and 105: 11BChapter 12: Configuring alarm se
- Page 106 and 107: 12BChapter 13: Configuring network
6BChapter 7: Controlling a PTZ cameraTo set up a preset tour:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the front panel joystick for Enter.The PTZ control panel appears.2. Click the Preset Tour button on the PTZ control panel. The PTZ Controlscreen appears with the Preset Tour tab open.3. In the Preset Tour No. box select a preset tour to set.4. In the list of presets, select the desired pre-programmed presets.5. Click the Set button to enter the preset tour configuration menu. A preset tourshould have at least two enabled presets.6. Set the step number, dwell time, and speed.7. Click the OK button to return to the preset tour configuration men.8. Repeat steps 2 to 7 to configure other steps.9. After all steps have been configured, click OK to save and return to PTZmode.To delete a preset tour:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the front panel joystick for Enter.The PTZ control panel appears.2. Click the Preset Tour button on the PTZ control panel. The PTZ Controlscreen appears with the Preset Tour tab open.3. Select a preset tour number and click the Clear button.Note: The Clear All button deletes all presets.4. Click the OK button to save changes and return to PTZ mode.Setting a shadow tourThe Shadow Tour function remembers the PTZ dome camera movement track.Only one shadow tour can be set up.Note: The PTZ dome camera must be able to support a shadow tour function.To set up a shadow tour:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.52 <strong>TruVision</strong> <strong>DVR</strong> <strong>60</strong> <strong>User</strong> <strong>Manual</strong>
Change language