TruVision DVR 60 User Manual - Interlogix
TruVision DVR 60 User Manual - Interlogix TruVision DVR 60 User Manual - Interlogix
6BChapter 7: Controlling a PTZ cameraIf the display was in multiscreen format, it changes to full screen format. SeeFigure 23 below for a description of the PTZ control panel.Figure 23: PTZ control panel1. Directional pad/auto-scan buttons: Controls the movements and directions of the PTZ. Center button is used to startauto-pan by the PTZ dome camera.2. Adjust iris.3. Adjust focus.4. Adjust zoom.5. Centers the PTZ dome camera. This function is not supported on all PTZ dome cameras.6. Instant zoom in. This function is not supported on all PTZ cameras.7. Adjust speed of PTZ dome camera movement.Setting a preset positionUse the Preset tab in the PTZ Control screen to select, set, and delete presets.Figure 24: Preset selection and setup screen50 TruVision DVR 60 User Manual
6BChapter 7: Controlling a PTZ cameraTo set up a preset:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the front panel joystick for Enter.The PTZ control panel appears.2. Use the directional, zoom, focus and iris buttons to position the camera in thedesired preset location.3. Click the Preset button on the PTZ control panel. The PTZ Control screenappears with the Preset tab open.4. Select a preset number and click the Set button. The preset is then enabledand stored in the camera.5. Click the OK button to save changes and return to PTZ mode.To delete a preset:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the joystick for Enter on the front panel.The PTZ control panel appears.2. Click the Preset button on the PTZ control panel. The PTZ Control screenappears with the Preset tab open.3. Select a preset number and click the Clear button.Note: The Clear All button deletes all presets.4. Click the OK button to save changes and return to PTZ mode.Setting a preset tourPreset tours move a PTZ dome camera to different steps and have it stay therefor a set dwell time before moving on to the next point. The steps are defined bypresets (see “Setting a preset position” on page 50.)Each preset tour consists of steps. A step consists of a step number, a dwelltime, and a speed.The step number is the order the camera will follow while cycling through thepreset tour. The dwell time is the length of time for which a camera stays at astep before moving to the next one. The speed is the rate at which the camerawill move from one step to the next.Note: The PTZ dome camera used must be able to support a preset tourfunction.TruVision DVR 60 User Manual 51
- Page 6 and 7: ivTruVision DVR 60 User Manual
- Page 8 and 9: 0BChapter 1: Product introductionFe
- Page 10: 0BChapter 1: Product introduction4
- Page 13 and 14: 1BChapter 2: InstallationFigure 1:
- Page 15 and 16: 1BChapter 2: InstallationFigure 2:
- Page 18 and 19: 1BChapter 2: InstallationCameraSwit
- Page 20 and 21: 1BChapter 2: InstallationUse an RS-
- Page 22 and 23: 1BChapter 2: InstallationBracketsTh
- Page 24 and 25: 1BChapter 2: Installation18 TruVisi
- Page 26 and 27: 2BChapter 3: Getting startedAny cha
- Page 28 and 29: 2BChapter 3: Getting startedCheck b
- Page 30 and 31: 3BChapter 4: Operating instructions
- Page 32 and 33: 3BChapter 4: Operating instructions
- Page 34 and 35: 3BChapter 4: Operating instructions
- Page 36 and 37: 3BChapter 4: Operating instructions
- Page 38 and 39: 3BChapter 4: Operating instructions
- Page 40 and 41: 4BChapter 5: Live modeFigure 13: Di
- Page 42 and 43: 4BChapter 5: Live modeTable 10: Pop
- Page 44 and 45: 4BChapter 5: Live modeItem Name Des
- Page 46 and 47: 5BChapter 6: Configuring the live m
- Page 48 and 49: 5BChapter 6: Configuring the live m
- Page 50 and 51: 5BChapter 6: Configuring the live m
- Page 52 and 53: 5BChapter 6: Configuring the live m
- Page 54 and 55: 6BChapter 7: Controlling a PTZ came
- Page 58 and 59: 6BChapter 7: Controlling a PTZ came
- Page 60 and 61: 6BChapter 7: Controlling a PTZ came
- Page 62 and 63: 7BChapter 8: Playing back a recordi
- Page 64 and 65: 7BChapter 8: Playing back a recordi
- Page 66 and 67: 7BChapter 8: Playing back a recordi
- Page 68 and 69: 7BChapter 8: Playing back a recordi
- Page 70 and 71: 7BChapter 8: Playing back a recordi
- Page 72 and 73: 8BChapter 9: Archiving recorded fil
- Page 74 and 75: 8BChapter 9: Archiving recorded fil
- Page 76 and 77: 8BChapter 9: Archiving recorded fil
- Page 78 and 79: 9BChapter 10: Using the Web browser
- Page 80 and 81: 9BChapter 10: Using the Web browser
- Page 82 and 83: 9BChapter 10: Using the Web browser
- Page 84 and 85: 9BChapter 10: Using the Web browser
- Page 86 and 87: 10BChapter 11: Configuring recordin
- Page 88 and 89: 10BChapter 11: Configuring recordin
- Page 90 and 91: 10BChapter 11: Configuring recordin
- Page 92 and 93: 10BChapter 11: Configuring recordin
- Page 94 and 95: 11BChapter 12: Configuring alarm se
- Page 96 and 97: 11BChapter 12: Configuring alarm se
- Page 98 and 99: 11BChapter 12: Configuring alarm se
- Page 100 and 101: 11BChapter 12: Configuring alarm se
- Page 102 and 103: 11BChapter 12: Configuring alarm se
- Page 104 and 105: 11BChapter 12: Configuring alarm se
6BChapter 7: Controlling a PTZ cameraTo set up a preset:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the front panel joystick for Enter.The PTZ control panel appears.2. Use the directional, zoom, focus and iris buttons to position the camera in thedesired preset location.3. Click the Preset button on the PTZ control panel. The PTZ Control screenappears with the Preset tab open.4. Select a preset number and click the Set button. The preset is then enabledand stored in the camera.5. Click the OK button to save changes and return to PTZ mode.To delete a preset:1. Enter PTZ mode by left-clicking the mouse on the desired camera image andselecting the PTZ icon in the cameo shortcut menu.- Or -Press the joystick for Enter on the front panel.The PTZ control panel appears.2. Click the Preset button on the PTZ control panel. The PTZ Control screenappears with the Preset tab open.3. Select a preset number and click the Clear button.Note: The Clear All button deletes all presets.4. Click the OK button to save changes and return to PTZ mode.Setting a preset tourPreset tours move a PTZ dome camera to different steps and have it stay therefor a set dwell time before moving on to the next point. The steps are defined bypresets (see “Setting a preset position” on page 50.)Each preset tour consists of steps. A step consists of a step number, a dwelltime, and a speed.The step number is the order the camera will follow while cycling through thepreset tour. The dwell time is the length of time for which a camera stays at astep before moving to the next one. The speed is the rate at which the camerawill move from one step to the next.Note: The PTZ dome camera used must be able to support a preset tourfunction.<strong>TruVision</strong> <strong>DVR</strong> <strong>60</strong> <strong>User</strong> <strong>Manual</strong> 51