TruVision DVR 60 User Manual - Interlogix
TruVision DVR 60 User Manual - Interlogix TruVision DVR 60 User Manual - Interlogix
5BChapter 6: Configuring the live mode displayTable 13: Description of the Time screenOptionTime zoneDate/time formatDate/timeMenu timeoutEnable DSTFrom / toDST BIASDescriptionSelect the time zone of the DVR from the drop-down list.Select the date format from the drop-down list. Default format is DD-MM-YYYY.Select the date and time to be displayed on-screen and saved onrecordings.Click the date icon on the right of the date list box. A calendar appears.Click the required date.In the time row select the correct time to be displayed.This is the length of time a menu is displayed on-screen. Only available forthe main monitor. Default is five minutes.Select the required timeout period.Click the check box to enable or disable daylight savings time (DST).Set the duration of DST.Enter the start and end dates and time for daylight savings.Set the amount of time to move DST forward from the standard time.Default is 60 minutes.To set up the system time and date:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Time tab. The Time screen appears. Modify the required settings.3. Click the Apply button to immediately implement the changes.4. Click OK to save the changes and return to the main menu.Changing the instant playback timeYou can quickly replay the last few minutes of recorded video. Use this menu toset the exact replay period. The time options are between one to five minutesfrom actual time. Default is one minute.To change the instant playback time:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Time tab. The Time screen appears.3. In the Instant Playback box select the desired replay period.4. Click OK to return to the main menu.Configuring display optionsUse this screen to set up the different monitors as well as the multiscreen, anddwell time options. You can also enable audio output.42 TruVision DVR 60 User Manual
5BChapter 6: Configuring the live mode displayFigure 19: Layout screenTable 14: Description of the layout screenOptionMain monitorLayout modeMain dwell timeDisplay layoutEnable audio outSpot monitorSpot dwell timeDescriptionSelect which monitor will be the main monitor. Default is VGA, if connected.Select which multiscreen layout will be default in live mode.Set the length of time for which a camera appears on-screen on the selectedmonitor before moving to the next camera during sequencing. Default is off.Set the camera order during sequencing. See “Sequencing cameras” on page44 for more information.Enable/disable audio output.Select which monitor will be the spot monitor. Default is B monitor.Set the length of time for which a camera appears on-screen on the spot (B)monitor before moving to the next camera during sequencing. Default is 10seconds.To set up the display options:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Layout tab. The Layout screen appears. Modify the requiredsettings.3. Click the Apply button to save the settings.4. Click OK to return to the main menu.Audio set upYou can hear audio from cameras in both live and playback mode. However, inorder to be able to hear audio in playback you must select the Enable Audiooption in the Display menu.To enable audio output:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Layout tab. The Layout screen appears.TruVision DVR 60 User Manual 43
- Page 6 and 7: ivTruVision DVR 60 User Manual
- Page 8 and 9: 0BChapter 1: Product introductionFe
- Page 10: 0BChapter 1: Product introduction4
- Page 13 and 14: 1BChapter 2: InstallationFigure 1:
- Page 15 and 16: 1BChapter 2: InstallationFigure 2:
- Page 18 and 19: 1BChapter 2: InstallationCameraSwit
- Page 20 and 21: 1BChapter 2: InstallationUse an RS-
- Page 22 and 23: 1BChapter 2: InstallationBracketsTh
- Page 24 and 25: 1BChapter 2: Installation18 TruVisi
- Page 26 and 27: 2BChapter 3: Getting startedAny cha
- Page 28 and 29: 2BChapter 3: Getting startedCheck b
- Page 30 and 31: 3BChapter 4: Operating instructions
- Page 32 and 33: 3BChapter 4: Operating instructions
- Page 34 and 35: 3BChapter 4: Operating instructions
- Page 36 and 37: 3BChapter 4: Operating instructions
- Page 38 and 39: 3BChapter 4: Operating instructions
- Page 40 and 41: 4BChapter 5: Live modeFigure 13: Di
- Page 42 and 43: 4BChapter 5: Live modeTable 10: Pop
- Page 44 and 45: 4BChapter 5: Live modeItem Name Des
- Page 46 and 47: 5BChapter 6: Configuring the live m
- Page 50 and 51: 5BChapter 6: Configuring the live m
- Page 52 and 53: 5BChapter 6: Configuring the live m
- Page 54 and 55: 6BChapter 7: Controlling a PTZ came
- Page 56 and 57: 6BChapter 7: Controlling a PTZ came
- Page 58 and 59: 6BChapter 7: Controlling a PTZ came
- Page 60 and 61: 6BChapter 7: Controlling a PTZ came
- Page 62 and 63: 7BChapter 8: Playing back a recordi
- Page 64 and 65: 7BChapter 8: Playing back a recordi
- Page 66 and 67: 7BChapter 8: Playing back a recordi
- Page 68 and 69: 7BChapter 8: Playing back a recordi
- Page 70 and 71: 7BChapter 8: Playing back a recordi
- Page 72 and 73: 8BChapter 9: Archiving recorded fil
- Page 74 and 75: 8BChapter 9: Archiving recorded fil
- Page 76 and 77: 8BChapter 9: Archiving recorded fil
- Page 78 and 79: 9BChapter 10: Using the Web browser
- Page 80 and 81: 9BChapter 10: Using the Web browser
- Page 82 and 83: 9BChapter 10: Using the Web browser
- Page 84 and 85: 9BChapter 10: Using the Web browser
- Page 86 and 87: 10BChapter 11: Configuring recordin
- Page 88 and 89: 10BChapter 11: Configuring recordin
- Page 90 and 91: 10BChapter 11: Configuring recordin
- Page 92 and 93: 10BChapter 11: Configuring recordin
- Page 94 and 95: 11BChapter 12: Configuring alarm se
- Page 96 and 97: 11BChapter 12: Configuring alarm se
5BChapter 6: Configuring the live mode displayTable 13: Description of the Time screenOptionTime zoneDate/time formatDate/timeMenu timeoutEnable DSTFrom / toDST BIASDescriptionSelect the time zone of the <strong>DVR</strong> from the drop-down list.Select the date format from the drop-down list. Default format is DD-MM-YYYY.Select the date and time to be displayed on-screen and saved onrecordings.Click the date icon on the right of the date list box. A calendar appears.Click the required date.In the time row select the correct time to be displayed.This is the length of time a menu is displayed on-screen. Only available forthe main monitor. Default is five minutes.Select the required timeout period.Click the check box to enable or disable daylight savings time (DST).Set the duration of DST.Enter the start and end dates and time for daylight savings.Set the amount of time to move DST forward from the standard time.Default is <strong>60</strong> minutes.To set up the system time and date:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Time tab. The Time screen appears. Modify the required settings.3. Click the Apply button to immediately implement the changes.4. Click OK to save the changes and return to the main menu.Changing the instant playback timeYou can quickly replay the last few minutes of recorded video. Use this menu toset the exact replay period. The time options are between one to five minutesfrom actual time. Default is one minute.To change the instant playback time:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Time tab. The Time screen appears.3. In the Instant Playback box select the desired replay period.4. Click OK to return to the main menu.Configuring display optionsUse this screen to set up the different monitors as well as the multiscreen, anddwell time options. You can also enable audio output.42 <strong>TruVision</strong> <strong>DVR</strong> <strong>60</strong> <strong>User</strong> <strong>Manual</strong>