TruVision DVR 60 User Manual - Interlogix
TruVision DVR 60 User Manual - Interlogix TruVision DVR 60 User Manual - Interlogix
5BChapter 6: Configuring the live mode displayTable 12: Description of the Monitor setup screenOptionDevice nameDevice addressVGA resolutionTransparency menuMonitor standardMonitor brightnessMouse pointer speedScaling monitor A / BPassword requiredDescriptionThe name to use for the DVR.The device number to use for the DVR when programming the remotecontrol or keypad.Define the VGA resolution.Select one of the options from the drop-down list. Default is1024×768/60 HZ.Modify the transparency of the menus on-screen relative to the backgroundto make the menu screens easier to read or less prominent on-screen.Default is non-transparent.Select one of the options from the drop-down list.The video standard used is auto detected.Modify the video standard used to PAL or NTSC.Modify the video output brightness.Modify the speed of the mouse pointer.Enable/disable the monitor display of the main (A) and spot (B) monitorssize to accommodate for differently sized monitors.Enable/disable system password.DVR name and addressThe DVR name is the name that appears on-screen such as during start up.When you use the IR remote control or keypad to operate the TVR 60, theTVR 60 must have a device address (bus ID). The default device address is 255for a remote control.If there is more than one DVR used, each device must have its own uniquedevice address as otherwise the IR remote control will control all the DVRstogether.To configure the device name and address:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Monitor tab. The Monitor screen appears.3. In the Device Name box, enter a name for the TVR 60 unit. You can enter upto 38 characters.4. Click the Device address edit box. The virtual keyboard appears. Enter anumeric value and click Enter. Up to eight digits can be entered. Defaultaddress for the remote control is 2555. Click the Apply button to save the settings.6. Click OK to return to the main menu.40 TruVision DVR 60 User Manual
5BChapter 6: Configuring the live mode displayMonitor setupTo configure monitors:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Monitor tab. The Monitor screen appears. Modify the requiredsettings. See Table 12 on page 40.3. Click the Apply button to save the settings.4. Click OK to return to the main menu.Enabling a passwordThe Password Required option determines whether or not users must enter theirpasswords to gain access to the different functions of the DVR.To enable password access:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Monitor tab. The Monitor screen appears.3. Check the Password Required box to enable or disable the option.4. Click the Apply button to save the settings.5. Click OK to return to the main menu.Configuring time and dateYou can set up the date and time that will appear on-screen and time stampedrecordings. The start and end time of daylight savings time (DST) in the year canalso be set. DST is deactivated by default. See Figure 18 below for the Timesettings screen.Figure 18: Time screenTruVision DVR 60 User Manual 41
- Page 6 and 7: ivTruVision DVR 60 User Manual
- Page 8 and 9: 0BChapter 1: Product introductionFe
- Page 10: 0BChapter 1: Product introduction4
- Page 13 and 14: 1BChapter 2: InstallationFigure 1:
- Page 15 and 16: 1BChapter 2: InstallationFigure 2:
- Page 18 and 19: 1BChapter 2: InstallationCameraSwit
- Page 20 and 21: 1BChapter 2: InstallationUse an RS-
- Page 22 and 23: 1BChapter 2: InstallationBracketsTh
- Page 24 and 25: 1BChapter 2: Installation18 TruVisi
- Page 26 and 27: 2BChapter 3: Getting startedAny cha
- Page 28 and 29: 2BChapter 3: Getting startedCheck b
- Page 30 and 31: 3BChapter 4: Operating instructions
- Page 32 and 33: 3BChapter 4: Operating instructions
- Page 34 and 35: 3BChapter 4: Operating instructions
- Page 36 and 37: 3BChapter 4: Operating instructions
- Page 38 and 39: 3BChapter 4: Operating instructions
- Page 40 and 41: 4BChapter 5: Live modeFigure 13: Di
- Page 42 and 43: 4BChapter 5: Live modeTable 10: Pop
- Page 44 and 45: 4BChapter 5: Live modeItem Name Des
- Page 48 and 49: 5BChapter 6: Configuring the live m
- Page 50 and 51: 5BChapter 6: Configuring the live m
- Page 52 and 53: 5BChapter 6: Configuring the live m
- Page 54 and 55: 6BChapter 7: Controlling a PTZ came
- Page 56 and 57: 6BChapter 7: Controlling a PTZ came
- Page 58 and 59: 6BChapter 7: Controlling a PTZ came
- Page 60 and 61: 6BChapter 7: Controlling a PTZ came
- Page 62 and 63: 7BChapter 8: Playing back a recordi
- Page 64 and 65: 7BChapter 8: Playing back a recordi
- Page 66 and 67: 7BChapter 8: Playing back a recordi
- Page 68 and 69: 7BChapter 8: Playing back a recordi
- Page 70 and 71: 7BChapter 8: Playing back a recordi
- Page 72 and 73: 8BChapter 9: Archiving recorded fil
- Page 74 and 75: 8BChapter 9: Archiving recorded fil
- Page 76 and 77: 8BChapter 9: Archiving recorded fil
- Page 78 and 79: 9BChapter 10: Using the Web browser
- Page 80 and 81: 9BChapter 10: Using the Web browser
- Page 82 and 83: 9BChapter 10: Using the Web browser
- Page 84 and 85: 9BChapter 10: Using the Web browser
- Page 86 and 87: 10BChapter 11: Configuring recordin
- Page 88 and 89: 10BChapter 11: Configuring recordin
- Page 90 and 91: 10BChapter 11: Configuring recordin
- Page 92 and 93: 10BChapter 11: Configuring recordin
- Page 94 and 95: 11BChapter 12: Configuring alarm se
5BChapter 6: Configuring the live mode displayMonitor setupTo configure monitors:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Monitor tab. The Monitor screen appears. Modify the requiredsettings. See Table 12 on page 40.3. Click the Apply button to save the settings.4. Click OK to return to the main menu.Enabling a passwordThe Password Required option determines whether or not users must enter theirpasswords to gain access to the different functions of the <strong>DVR</strong>.To enable password access:1. Enter the Display Settings screen by selecting Display in the main menu.2. Click the Monitor tab. The Monitor screen appears.3. Check the Password Required box to enable or disable the option.4. Click the Apply button to save the settings.5. Click OK to return to the main menu.Configuring time and dateYou can set up the date and time that will appear on-screen and time stampedrecordings. The start and end time of daylight savings time (DST) in the year canalso be set. DST is deactivated by default. See Figure 18 below for the Timesettings screen.Figure 18: Time screen<strong>TruVision</strong> <strong>DVR</strong> <strong>60</strong> <strong>User</strong> <strong>Manual</strong> 41
Change language