TruVision DVR 60 User Manual - Interlogix

3BChapter 4: Operating instructionsTo use a USB mouse:1. Plug USB mouse into one of the USB ports on the front or rear panel of theDVR.2. The mouse should automatically be detected.See Table 5 below for a description of the mouse buttons.Table 5: Mouse buttonsItemLeft buttonRight buttonScroll-wheelDescriptionSingle-Click: Select a component of a menu, such as a button or an input field. Thisis similar to pressing the Enter button on the remote/front panel controls.Double-Click: Switch between single screen and multi-screen mode in live/ playbackmode.Click and Drag: Click and drag the left mouse button to setup the alarm areas.Single-Click: Shows pop-up menuScroll Up: In Live mode, scrolling up will switch to the previous screen. In Menumode, it will move the selection to the previous item.Scroll Down: In live mode, scrolling down will switch to the next screen. In Menumode, it will move the selection to the next itemUsing the IR remote controlThe TVR 60 is supplied with an infra red (IR) remote control unit. Like the mouse,it can be used to operate all of the main functions of the TVR 60.The IR remote control can be programmed with a unique device ID address sothat the controller will only be able to communicate with DVRs with that address.No programming is necessary if using a single TVR 60.The device ID address only applies when using a remote control and not whenusing a keypad.You can purchase a remote control by ordering part number TVR-REMOTE-1TruVision DVR Model 40/60 IR Remote Control.26 TruVision DVR 60 User Manual