TruVision DVR 60 User Manual - Interlogix

2BChapter 3: Getting startedAny changes you make to a setup configuration screen are saved when you exitthe screen and return to the main eZ Setup screen.Note: The TVR 60 firmware supports over 16 languages.Figure 8: Setup Wizard screenTo quickly set up the TVR 60:1. Connect all the devices required to the rear panel of the TVR 60. SeeFigure 1 on page 7.2. Turn on the unit using the power switch on the rear panel. After the boot upscreen, the TVR 60 displays video images on-screen.3. Select the preferred language for the system.4. In the eZ Setup screen, click Next. The User Permission screen appears.5. Administrator configuration:Navigate to the Admin Password edit box and click the edit box with themouse, or press Enter on the front panel or remote control, to display thevirtual keyboard. Enter the default admin password, 1234.Note: You must enter an admin password.Caution: It is strongly recommended that you change the password of theadministrator. Do not leave 1234 as the default password. Write it down in asafe place so that you do not forget it.Click Next. You are then asked if you want to enter the HDD Managementscreen.6. HDD management:Click Enter to open the HDD Management screen and configure your HDDsettings as required.20 TruVision DVR 60 User Manual