TruVision DVR 60 User Manual - Interlogix

1BChapter 2: InstallationBracketsThe DVR is easily rack-mountable with the purchase of the TVR-RK-1 rackmountkit. See Figure 7 below. Contact your local supplier to order it.Figure 7: Rack mount installationAttach small front rack ears to the unit(screws supplied)Attach DVR to front rails(screws not included)To install the racks:1. Attach the two small front-rack mount ears to the DVR (screws supplied).2. Attach the two large rear support brackets (not supplied) to the rear rails.3. Attach the DVR to the front rails (screws not supplied).Caution:Do not rack mount the TVR 60 without the rear rails installed. Failure to install the rearrails can damage the DVR.• Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly,the operating ambient temperature of the rack environment may be greater thanroom ambient. Therefore, consideration should be given to installing theequipment in an environment compatible with the maximum ambienttemperature (40°C) specified by the manufacturer.• Reduced Air Flow - Installation of the equipment in a rack should be such that theamount of air flow required for safe operation of the equipment is notcompromised.• Mechanical Loading - Mounting of the equipment in the rack should be such thata hazardous condition is not achieved due to uneven mechanical loading.16 TruVision DVR 60 User Manual