TruVision DVR 60 User Manual - Interlogix

20BAppendix E: PTZ protocolsTVR 60 mapping to the KTD-405 keypadTable 24: TVR 60 mapping to the KTD-405 keypadTask Keypad action Further information• Menu modeCall up or exit menuMove through the menusIn live view, press esc.Press and hold esc and thenpress the arrow buttons.Move between menu tabs Press or to switchbetween menu tabs.Navigate to a menu optionSelect a character or menuoptionSelect the zone ID• Live modeCall up a single cameraCall up multiview screensSequence through camerasSequence through multiviewscreensSwitch between monitor A andmonitor BManually acknowledge an alarm• PTZ functionsPress and hold esc and thenpress the arrow buttons.Down, Up, Left,RightDown, Up, Left,RightPress Enter ( ). Note. If you press esc beforepressing Enter, you quit the menuwithout saving any changes. It is thesame as cancel.Press zone to connect thekeypad to the DVR.Press 0 to 9 and then pressEnter ( ).Press view and then continueto press button 5 to scrollthrough the options available.Press the seq button to scrollthrough the cameras in fullscreen.Press and hold esc and thenpress the left/right arrowbuttonsPress the mon button andbutton 1 to switch to monitor A.Press the mon button andbutton 2 to switch to monitor B.Press Alarm.Enter PTZ mode In live mode, press Enter ( ).PTZ functions (Up, Down, Left,Right, Zoom in, Zoom out)Leave PTZ modeMove the joystick to move thedome up, down, left and rightPress zoom+ and zoom-.Press esc.Using the numeric buttons 0 to 9,enter the number of the camera andthen press Enter ( ).To return to the previously selectedmonitor, you must deselect thecurrent monitor by re-entering thecombination again. So to return tomonitor B, press mon 1 to return tomonitor B, or press mon 2 to returnto monitor A,Note: The keypad display willalways indicate monitor A evenwhen monitor B is selected.KTD-405U: Turn the knob on thejoystick to zoom in/zoom out.KTD-405-2DU: Press the zoom+and zoom- buttons.144 TruVision DVR 60 User Manual