TruVision DVR 60 User Manual - Interlogix

20BAppendix E: Configuring the DVR settings5. To connect it to the DVR, press the zone button and enter the ID number ofthe TVR 60. The default value is “1”.6. To configure the DVR zone ID number, at the DVR enter the System Viewscreen by selecting System in the main menu. Under Zone ID, enter the zoneID value. The default value is “1”.Note: The zone ID value must be identical for the DVR and keypad.The TVR 60 is now connected to the KTD-405 keypad.To configure the TVR 60 device address:1. Click the Display in the main menu and select the Monitor tab2. Click the Device address edit box and enter a numeric value. The defaultaddress for the keypad is “1”. Click EnterTVR 60 and keypad functionsThe KTD-405U acts as a DVR control keypad when connected to the TVR 60.The keypad mimics many of the functions available from the front panel of theTVR 60.Unavailable TVR 60 functionsThe following TVR 60 functions are unavailable when using the keypad to controlthe TVR 60:• Export video• Eject CD/DVD• Preset and shadow tour• Select motion detection or tampering zones• Archive records• Capture videoIf these functions are required, it is recommended to use a mouse in conjunctionwith the keypad as all TVR 60 functions will then be available.Unavailable keypad functionsThe following keypad buttons are unavailable when using the keypad to controlthe TVR 60:TruVision DVR 60 User Manual 141