TruVision DVR 60 User Manual - Interlogix
TruVision DVR 60 User Manual - Interlogix
TruVision DVR 60 User Manual - Interlogix
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
1BChapter 2: InstallationFigure 1: Rear panel connections1. Connect up to 16 analog cameras to BNC connectors.2. Connect to audio inputs (available for each camera) toRCA connectors.3. Connect up to two CCTV monitors (monitors B andC).4. Connect to speakers for audio output.5. Connect VGA monitor (default main monitor).6. For future use.7. Connect to an eSATA device.8. Connect to a network.9. Connect to USB devices such as a mouse. USBCD/DVD burner and USB HDD are not supported.10. Terminate the line to the dome cameras using thisRS-485 switch. Default is Off.11. Connect to a PTZ control.12. Connect to a keypad (KTD-405 shown)13. Connect up to 16 alarm input cables to relay outputs.14. Connect up to four NO/NC alarm relay outputs.15. Connect to a power cord.16. Loop through for up to 16 analog cameras (seeitem 1).IP cameras supportedThe TVR <strong>60</strong> supports the following IP cameras with their resolutions andmaximum bit rates. See Table 3 below.Table 3: IP cameras supportedSupported cameras<strong>TruVision</strong> 2MPX camera<strong>TruVision</strong> 1.3MPX cameraResolutionssupportedUXGA, HD720P, 4CIF,2CIF, CIF, QCIFHD720P, 4CIF, 2CIF,CIF, QCIFMaximum bit rate -Main stream2Mbps2MbpsMaximum bit rate- Sub stream1Mbps1MbpsUltraView encoder 4CIF, 2CIF, CIF, QCIF 1.7Mbps 1MbpsUltraView IP box camera 4CIF, 2CIF, CIF, QCIF 1.7Mbps 1MbpsUltraView IP dome camera 4CIF, 2CIF, CIF, QCIF 1.7Mbps 1Mbps<strong>TruVision</strong> <strong>DVR</strong> <strong>60</strong> <strong>User</strong> <strong>Manual</strong> 7
Change language