TruVision DVR 60 User Manual - Interlogix

15BChapter 16: Configuring the DVR settings• Network Log Search: Remotely view logs that are saved on the DVR.• Network Configuration Parameters: Remotely configure parameters,restore parameters to factory defaults and import settings to as well as exportsettings from DVR.• Network Camera Management: Remotely enable and disable analogchannels. Add and delete IP cameras.• Network Serial Ports: Configure settings for the RS-232 port.• Network Allocating Video Output: Configure settings for video output.• Two-Way Audio: Use two-way radio between the remote client and the DVR.• Network Layout Alarm and Trigger Alarm Output: Remotely alert orcontrol the relay output of the DVR. Alarm and notification settings must beconfigured properly to upload to host.• Network Advanced Management: Remotely manage hard disk drives(initializing and setting properties for HDDs) as well as remotely updatesystem firmware and stop the relay output• Network Shutdown: Remotely shutdown the DVR.The camera settings include:• Network Live: Select and view live video over the network.• Remote Record Starting: Remotely start and stop manual recording on anyof the channels.• Local Playback: Locally play recorded files that are on the DVR.• Remote Playback: Remotely play and download recorded files that are onthe DVR.• Network PTZ Control: Remotely control PTZ dome cameras.• Local Backup: Locally back up recorded files from any of the channels.Table 21: Fixed access privilege settings by user levelPrivilegeLocal settings:User levelAdministrator Manager Operator CustomLocal Log Search X X Local Configuration X Local Camera Management X Local Advanced Management X Local Shutdown/Reboot X X Network settings:Network Log Search X X Network Configuration Parameters X Network Camera Management X 122 TruVision DVR 60 User Manual