TruVision DVR 60 User Manual - Interlogix

13BChapter 14: Camera managementYou can select one of the following options:• Steady• Steady & Flashing• Transparent• Transparent & Flashing8. To configure where you want the camera information displayed on-screen,click Text Position Setup.You are taken to a camera view screen and an area marked where thecamera information is displayed. Click and drag the marked area anywhereon the screen to set the display position.9. To copy the configured settings to a different camera (or all), select a Camerafrom the Copy To box, and then click Copy.10. Click Apply to save your changes, and OK to exit the screen.Setting up privacy maskingFor analog cameras you can define an area on screen that can remain hiddenfrom view. For example, you can choose to block the view of an analog camerawhen overlooking residential premises. This hidden area is referred to as privacymasking. Privacy masking cannot be viewed live or recorded, and appears as ablank screen on display.However, although you can select the privacy masking option for IP cameras,you cannot set up an area where it applies on-screen. Areas are selected fromthe IP camera itself. Refer to the IP camera user manual for information on doingthis.To setup a privacy mask:1. Enter the Camera Management screen by clicking Camera in the main menu.2. Select camera for which to setup privacy masking in the Camera box.3. Click the Advanced tab to enter the Advanced Camera Settings screen.4. Check the Privacy Masking box to enable feature.TruVision DVR 60 User Manual 109