TruVision DVR 60 User Manual - Interlogix

13BChapter 14: Camera managementEnter the password of the IP camera under Admin Password. The default IPcamera password is 1234.Note: You must enter the password of the IP camera for the camera to becorrectly installed.7. Click OK to save and return to the Camera Management screen. It takesbetween 10 and 20 seconds for the new IP camera to be listed.When an IP camera has been successfully added, the status for that camerais displayed as enabled. If it has not been correctly installed (such as youdidn’t enter its password), delete the camera listed and repeat the procedure.Configuring the OSD settingsYou can configure what information is displayed on-screen for analog camerasonly.The on-screen display (OSD) settings apply on each display while in live modeand include the camera name, time and date.To configure the OSD settings:1. Enter the Camera Management screen by clicking Camera in the main menu.2. Select camera for which to setup OSD settings in the Camera box.3. Click Setup to display the Camera Settings screen. The OSD tab is displayedby default.4. Enter a name for the camera.Note: Although you can enter a camera title for an IP camera, it will not bedisplayed on-screen. The other OSD menu options are not available for IPcameras.5. Check the Display Camera Name, Display Date, and Display Week boxes ifyou want to display the camera name, date, and week.6. Select a Date Format and a Time Format.7. Select how you want the camera information displayed.108 TruVision DVR 60 User Manual