TruVision DVR 60 User Manual - Interlogix

13BChapter 14: Camera managementFigure 38: Camera management screenEnabling or disabling analog camerasWhen you turn on the DVR the status of all 16 IP cameras is automatically onand all the cameras are recording, even if there are not 16 analog camerasconnected. You can disable the unused camera links in order to save space onthe hard drive.You may also need to disable analog cameras in order to be able to add more IPcameras to the system. You need to disable one analog camera to add one 4CIFIP camera, and to disable two analog cameras to add one 720p IP camera.To enable or disable analog cameras:1. Enter the Camera Management screen by clicking Camera in the main menu.2. Determine the number of analog cameras to disable.3. Click the Status button to enter the Analog Camera Status menu.4. Clear the check boxes of the cameras you want to disable.5. Click OK to save your settings.A confirmation message appears on the screen prompting you to reboot theDVR. Click Yes to reboot.106 TruVision DVR 60 User Manual