TruVision DVR 60 User Manual - Interlogix

12BChapter 13: Configuring network settings• Subnet Mask: The subnet mask for your network so the DVR will berecognized within the network.• Gateway: The IP address of your network gateway so the DVR will berecognized within the network. This is typically the IP address of yourrouter.• Primary/Secondary DNS Server: The preferred and alternate DomainName System (DNS) Server to use with your DVR.5. Click OK to save and exit the Network Settings menu.Configuring the DDNSIf your DVR is set up to use PPPoE as its default network connection, you canset up Dynamic DNS (DDNS) to be used in conjunction.To set up DDNS:1. Enter the Network Settings screen by selecting Network in the main menu.2. Click the Advanced tab.3. Click Setup next to DDNS to enter the DDNS screen.4. Check the DDNS box to enable feature.5. Select a DDNS Type.You can select one of the following:• PeanutHull: Enter the User Name and Password obtained from thePeanutHull website.• DynDNS: Enter the Server Address for DynDNS (i.e.members.dyndns.org). In the DVR Domain Name field, enter the domainobtained from the DynDNS Web site. Then enter the User Name andPassword registered in the DynDNS network.6. Enter the Server Address and the DVR Domain Name.7. Enter the User Name and Password.8. Enter the password again to confirm.100 TruVision DVR 60 User Manual