TruVision DVR 60 User Manual - Interlogix

11BChapter 12: Configuring alarm settingsTo set up video tampering detection:1. Enter Camera Management screen by selecting Camera in the main menu.2. Select a camera for which you want to configure video loss detection, andthen click Setup.3. Click the Advanced tab.4. Check the Tamper Detection box to enable the feature.5. Click Area Setup next to the Tamper Detection box to enter the tamperdetection area setup interface.6. Define a tampering area.The tamper detection area setup interface, shown in the figure below, lets youto define areas where you in which you want camera tamper to be detected.Click and drag an area to mark that area for video tampering. Marked areasare outlined by a red outline. You can only set one tampering area with thefull screen being the maximum area.7. Right-click the mouse, and then click Sensitivity to set the tamper detectionsensitivity. A higher value indicates higher sensitivity and vice versa.8. Click Exit to return to the Camera Settings screen.9. Click Rules next to the Tamper Detection box to enter the Rules screen.10. Click the Notifications tab to define the method you want your DVR to notifyyou of video tampering. See “Description of alarm notification types” on page88 for more information. Click OK.11. Click the Schedule tab. Set the schedule of when you want video tamperingdetection to be enabled. Schedule can be set for all week or any day of theweek with up to eight time periods per day.12. Click the Apply button to finish.13. Repeat steps 2 to 12 for other cameras.98 TruVision DVR 60 User Manual