TruVision DVR 60 User Manual - Interlogix

11BChapter 12: Configuring alarm settings2. Select a camera to configure for video loss detection, and then click Setup.3. Click the Advanced tab.4. Check the Video Loss Detection box to enable feature.5. Click Rules next to the Video Loss Detection box to enter the Rules screen.6. Click the Notifications tab to define how you want your DVR to notify you ofvideo loss. For more information, see “Description of alarm notification types”on page 88. Click OK.7. Click the Schedule tab.8. Set the schedule of when you want video loss detection to be enabled.Schedule can be set for all week or any day of the week with up to 8 timeperiods per day.9. Click the Apply button to finish.10. Repeat above for other channels.Detecting video tamperingVideo tampering, such as moving a camera to a different position, can also bedetected and set to trigger an action on your DVR.Both analog and IP cameras can be selected. However, not all IP cameras maysupport this feature.Note: It is strongly recommended not to configure for video tampering whenusing PTZ dome cameras.TruVision DVR 60 User Manual 97