TruVision DVR 60 User Manual - Interlogix

11BChapter 12: Configuring alarm settings• Alarm Out: Trigger an alarm output when a notification is detected. An alarmoutput can be configured by following the steps listed in “Setting up externalalarms” on page 92.• Email Notification: Sends an e-mail when an alarm or notification isdetected. Sending an email can be configured by following the steps listed in“Configuring e-mail settings” on page 103.• Other Notification: Panel Alarm LED: Triggers the alarm indicator bar onthe front panel to flash on and off when a notification or alarm is detected.• Motion Alarm: Triggers the alarm indicator bar on the front panel to flash onand off when a motion alarm is detected. The Panel Alarm LED option mustalso be checked.To set up system notifications:1. Enter the Notification screen by clicking Alarms in the main menu, and thenthe Notification tab.2. Select the notification event to configure under Notification Type box.3. Select a notification type. See “Description of alarm notification types” onpage 88 for more information.4. Click OK to save and exit the Notification menu.Detecting video lossVideo may be lost if the video cable or camera develop a fault or are damaged.You can set up your DVR to detect video loss and trigger a notification.To setup video loss detection:1. Enter Camera Management screen by selecting Camera in the main menu.96 TruVision DVR 60 User Manual