RigExpert AA-230PRO - Antenna Analyzer (0.3 to 230 MHz)
RigExpert AA-230PRO - Antenna Analyzer (0.3 to 230 MHz)
RigExpert AA-230PRO - Antenna Analyzer (0.3 to 230 MHz)
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>RigExpert</strong> <strong>AA</strong>-<strong>230</strong> - <strong>Antenna</strong> <strong>Analyzer</strong> (<strong>0.3</strong> <strong>to</strong> <strong>230</strong> <strong>MHz</strong>)<strong>RigExpert</strong> <strong>AA</strong>-<strong><strong>230</strong>PRO</strong> - <strong>Antenna</strong> <strong>Analyzer</strong> (<strong>0.3</strong> <strong>to</strong> <strong>230</strong> <strong>MHz</strong>) +Time Domain Reflec<strong>to</strong>meter
<strong>RigExpert</strong> <strong>AA</strong>-<strong>230</strong> and <strong>AA</strong>-<strong><strong>230</strong>PRO</strong> are powerful, labora<strong>to</strong>ry grade antenna analyzersdesigned for testing, checking, tuning or repairing antennas and antenna feedlines in<strong>0.3</strong> <strong>to</strong> <strong>230</strong> <strong>MHz</strong> range.Mainly, these are SWR (Standing Wave Ratio) and impedance measurementinstruments (vec<strong>to</strong>r impedance analyzers).Easy-<strong>to</strong> use measurement modes, as well as additional features such as memorys<strong>to</strong>rage and connection <strong>to</strong> a personal computer, make <strong>RigExpert</strong> analyzers attractivefor professionals and hobbyists. It is quite important that graphical display of variousparameters over a wide frequency range is a key feature of these analyzers whichsignificantly reduces the time required <strong>to</strong> adjust an antenna.The new MultiSWR and SWR2Air modes are unique for these antennaanalyzers.The built-in TDR (Time Domain Reflec<strong>to</strong>meter) mode which is available in<strong>RigExpert</strong> <strong>AA</strong>-<strong><strong>230</strong>PRO</strong> is ideal for locating cable faults.The following tasks are easily accomplished by using <strong>RigExpert</strong> <strong>AA</strong>-<strong>230</strong> and<strong>AA</strong>-<strong><strong>230</strong>PRO</strong>:Rapid check-out of an antennaTuning an antenna <strong>to</strong> resonance<strong>Antenna</strong> SWR and impedance measurement and comparison beforeand after specific event (rain, hurricane, etc.)
Making coaxial lines or measuring their parametersCable testing and fault locationMeasuring capacitance or inductance of reactive loadsSpecificationsFrequency range: <strong>0.3</strong>…<strong>230</strong> <strong>MHz</strong>Display modes:- SWR at single frequency- SWR, R, X, Z, L, C at single frequency- SWR graph- R, X graph- <strong>AA</strong>-<strong><strong>230</strong>PRO</strong>: TDR (impulse and step response) graphSingle- and multi-frequency measurement:- Frequency resolution: 1 kHz- SWR only mode: easily-readable bar- SWR range: 1…10- SWR display for:<strong>AA</strong>-<strong>230</strong>: 50 and 75 Ohm systems;<strong>AA</strong>-<strong><strong>230</strong>PRO</strong>: 25, 50, 75 and 100 Ohm systems- R, X range: 0…1000, -1000…1000 OhmSWR and R, X graphs:- 100 points plot- Sweep width: 0.01…<strong>230</strong> <strong>MHz</strong>- Frequency resolution: 1 kHz- SWR range: 1…10- SWR display for:<strong>AA</strong>-<strong>230</strong>: 50 and 75 Ohm systems;<strong>AA</strong>-<strong><strong>230</strong>PRO</strong>: 25, 50, 75 and 100 Ohm systems- R, X range: 0…200, -200…200 Ohm- Memories: <strong>AA</strong>-<strong>230</strong>: 100 memories <strong>to</strong> s<strong>to</strong>re and recall graphs; <strong>AA</strong>-<strong><strong>230</strong>PRO</strong>: 90memories <strong>to</strong> s<strong>to</strong>re and recall graphs- Presets for radio amateur bandsTDR (impulse and step response) graphs, <strong>AA</strong>-<strong><strong>230</strong>PRO</strong> only:- 100 points plot- Measurement for 25, 50, 75 and 100 Ohm systems- Max. distance: about 300m (1000 ft)- Resolution: about 25 cm (10 inches)- Cable velocity fac<strong>to</strong>r: 0.5 <strong>to</strong> 1- 10 memories <strong>to</strong> s<strong>to</strong>re and recall graphsRF output:- Connec<strong>to</strong>r type: UHF- Power: typ. 10 dBm
Power:- 4.8V, 1800 mA·h, Ni-MH battery- Max. 3 hours of continuous measurement- Max. 2 days in stand-by mode- External 9…14V, 500 mA charger- Full charge time: 10…12 hoursInterface:- 128x64 graphical LCD with backlit- 6x3 keys on the water-proof keypad- Multilingual menus and help screens- USB connection <strong>to</strong> the personal computerDimensions: 23·10·5.5 cm (9·4·2”)Operating temperature: 0…40 °C (32…104 °F)Weight: 650g (23 Oz)
Change language