Sawing - Falco Depo Udvar

Sawing- IndexG6.3ExtraMAX TMApplication:AlongCutting along the grainAcrossCutting across the grainAcross & alongCutting along and acrossthe grain or cutting panel materialsLaminate board (plywood)Particle boardPanel sizing machinesScoringHoggingPortable MachinesAdditional Options:Negative hook angleInclude 0 deg.Positive hook angleDynamic balancingUnique balancing procedure according toIso 1940 performed on special dedicatedbalancing machines, for best performanceas a result of minimal vibrations.Dynamic straightnessFully automated high performance dynamicoperation for straightening the saw, assuringlong-lasting straightness, life-time and cuttingquality.Technical InformationGrinding TypeFlat top (FT)For cutting soft and hard wood along the grain(Ripping)Alternate top bevel (ATB)For: 1. cross cutting of soft and hard wood2. cutting plywood and veneered boardsHigher alternate top bevelFor chip free cutting on a table saw of melamin coatedboards.Triple chip (TCG)For cutting man made particle boards coated andnon coatedAlternaate bevel tooth, chamferedFor cutting man made particle boards coated and noncoatedHollow ground (HG)For: 1. cross cutting of soft and hard wood2. cutting plywood and veneered boards3. cutting man made particle coated boards4. cutting plastic boardsCone form (conical)For Scoring applicationAdjustable alternate top bevelFor Scoring applicationCan be used for multi rip sawingoperationChip limiter body designVipers includedThick kerfThin kerfWetCutting wet woodCombination toothFor: 1. cross cutting of soft and hard wood2. cutting plywood and veneered boardsLow vibration body designCustom Tooling RoutingDrillingCuttingCNCSawingIndex