User Manual - pancroma

Add the green band and the red band the same way. Now you are ready to addthe band data for the second file. Just repeat the above operation, choosing thesecond group in the order shown above. You will notice that after every thirdband file the ‘Save Path’ button will become enabled. Saving the path tellsPANCROMA TM where to store the processed graphics files. In order to do soyou must provide a root file name.Each processed file will be given a unique name equal to the base name plus anindex. Note that you only click the ‘Save Path’ button one time after you arefinished adding all of your band files to the queue. Activating the ‘Save Path’button disables the ‘Add File’ button so you will be unable to add more files andwill have to start over again. You can choose JPEG, TIF or PNG format. If youwish to set the image processing parameters, check the ‘Activate ImageProcessing Routines’ check box.Once you have saved the path you can click the ‘Run’ button. If you havechecked the ‘Activate Image Processing Routines’ check box the data input boxwill appear on the screen. Make any adjustments that you wish, for examplesetting haze reduction. Keep in mind that any settings that you select will applyto all of the images in the batch queue. Select the ‘Process Image’ button if theimage processing data input box is visible. Run progress will be displayed onthe diagnostic screens and you will be notified of a successful run. If there is a88