User Manual - pancroma

Add multispectral band2, band3, band4, band5 and band7 the same way. Nowyou are ready to add the band data for the second scene. Just repeat the aboveoperation, choosing six bands from the second scene in the order shown above.Repeat as many times as desired. You will notice that after every sixth band filethe ‘Save Path’ button will become enabled. Saving the path tellsPANCROMA TM where to store the processed graphics files. In order to do soyou must provide a root file name.Each processed file will be given a unique name equal to the base name plus anindex. Note that you only click the ‘Save Path’ button one time after you arefinished adding all of your band files to the queue. Activating the ‘Save Path’button disables the ‘Add File’ button so you will be unable to add more files andwill have to start over again.Once you have saved the path you can click the ‘Run’ button. After the first bandis read, you will be prompted to enter your corner coordinates into a dialog boxusing your mouse or by keying them in as shown in the previous section. Whenyou are done Accept and click ‘Enter’.Run progress will be displayed on the diagnostic screens and you will be notifiedof a successful run. If there is a problem with an input file it will be logged on thedata screen. The Data Entry Form will stay open throughout the run. You canclose it by clicking on the ‘Close Window’ button at the completion of the run.46