BMW K+CAN INPA/SSS/DIS/CARSOFT/NAVCODER usb interface ...

11.02.2011 BMW K+CAN INPA/SSS/DIS/CARSOFT…
The Following 40 Users
Say Thank You to
yorugualoco For This
Useful Post:
yorugualoco
Junior Member
Join Date: May 2010
Posts: 42
Last edited by yorugualoco; 15th December, 2010 at 02:31 AM.
735Pawel (29th December, 2010), A630V (12th November, 2010), adam28 (27th
December, 2010), alkounte (17th December, 2010), andrey3 (15th January, 2011),
Autronic (26th January, 2011), bako61 (18th November, 2010), blackpirate (21st
September, 2010), cjawahir (12th November, 2010), cqae (10th November, 2010),
DIBEKOT (28th December, 2010), drivergabriel (29th September, 2010),
eliotroyano (23rd October, 2010), evgensuni (29th November, 2010), Fallen (26th
October, 2010), fifas2010 (29th September, 2010), Freezzby (28th November,
2010), gcesare21 (23rd October, 2010), Gutz (18th November, 2010), hurtule (5th
December, 2010), kaci (29th October, 2010), kugglefischer (29th October, 2010),
mazenrbn (27th September, 2010), mdanilo (22nd October, 2010), MiramaX3 (19th
December, 2010), misham (22nd September, 2010), notoetannoto (21st October,
2010), paro44 (25th November, 2010), poteroa (28th November, 2010),
Predi76 (28th December, 2010), robertofonte (5th December, 2010), sirdaniel (29th
October, 2010), sl4ck (1st December, 2010), testnet (28th October, 2010),
THeFOg (29th January, 2011), WENKAT (23rd October, 2010), Wooflow (7th
October, 2010), xaralampos b. (23rd October, 2010), xbyte (27th October, 2010),
yosarian (22nd September, 2010)
21st September, 2010, 03:07 PM #2
if your vagcom comes with ft232bm/bl chips, don't worry you only need to do some work
for those chips
pin 17 is GND
pin 18 is RI
pin 20 is DSR
so you need to solder pins 17,18 and 20 of the FTDI chip (this applies to the BL and BM) like
this
digital-kaos.co.uk/…/bmw-k-can-inpa-… 4/17