BMW K+CAN INPA/SSS/DIS/CARSOFT/NAVCODER usb interface ...
BMW K+CAN INPA/SSS/DIS/CARSOFT/NAVCODER usb interface ...
BMW K+CAN INPA/SSS/DIS/CARSOFT/NAVCODER usb interface ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
11.02.2011 <strong>BMW</strong> <strong>K+CAN</strong> <strong>INPA</strong>/<strong>SSS</strong>/<strong>DIS</strong>/<strong>CARSOFT</strong>…<br />
Join Date: May 2010<br />
Posts: 42<br />
Thanks: 11<br />
Thanked 171 Times in 18<br />
Posts<br />
Downloads: 2<br />
Uploads: 0<br />
The Following User Says<br />
Thank You to<br />
yorugualoco For This<br />
Useful Post:<br />
yes sure, you MUST do it, otherwise you won't be able to access all modules from<br />
the car<br />
Siempre hay que soldar los pins 7 y 8 del obd2, corresponden a las dos lineas K de<br />
bmw, si no los sueldas no puedes acceder a todas las centralitas del coche (solo<br />
podras acceder al motor y la caja de cambios)<br />
manocao (17th October, 2010)<br />
25th October, 2010, 09:36 PM #14<br />
peshocbx<br />
Newbie<br />
Join Date: May 2010<br />
Posts: 2<br />
Thanks: 7<br />
Thanked 56 Tim es in 1 Post<br />
Downloads: 0<br />
Uploads: 0<br />
manocao<br />
DK Veteran<br />
Join Date: Sep<br />
2009<br />
Posts: 722<br />
Thanks: 57<br />
Thanked<br />
1,195 Tim es<br />
in 261 Posts<br />
Downloads: 0<br />
Uploads: 0<br />
Perfectly described and works... thanks!!!!<br />
26th October, 2010, 10:19 PM #15<br />
hi yorugualoco,<br />
some questions,<br />
i have modded my vag com kkl <strong>interface</strong> with ft232BL (not RL) as you said and installed inpa<br />
(loader 4.4.7, bmw group rectification programs uk v3.01) but when i connect <strong>interface</strong> to<br />
computer and start inpa (_.ipo) i only get battery on = black dot (ignition is off = white dot)<br />
i have conected <strong>interface</strong> to 220v/12v ac/dc power adapter (+12v to pin 16 and gnd to<br />
pin4+5) but i get the same results<br />
will ignition dot turn black when connecting <strong>interface</strong> to car so that pin1 is also powered? or<br />
what is the problem?<br />
thanks<br />
edit: exactly! it works! i have powered pin 1 of <strong>interface</strong> and i get both black dots!<br />
in your picture both dots are black without connecting <strong>interface</strong> to car ?????<br />
edit: sure, because your <strong>interface</strong> got no transistor, so it doesnt depends on pin1 to make<br />
ignition dot black<br />
This im age has been resized. Click this bar to view the full image. The original image is sized 800x600.<br />
digital-kaos.co.uk/…/bmw-k-can-inpa-… 13/17