UNDERWAY REPLENISHMENT NWP 4-01.4 - Historic Naval Ships ...

NWP 4-01.4NONTENSIONEDSPANWIRE RIGCLOSE-INRIGSPAN-LINERIGEQUIPMENT*WITHPROBEWITHROBBCOU-PLINGWITH2-1/2"(63.5mm)AUXWITHROBBCOU-PLING2-1/2"(63.5mm)REMARKSProbe, Single 1 [1] — — — Send to receiving ship withdouble- or single-probereceiver(s)Projectile, Gun LineWith Shot LineRiding Line Fitting,Flow-ThruSaddle, Hose,Flow-Thru — Type ASaddle, Hose,Flow-Thru — Type B2 2 2 2 2 (Note 2)2[4] 2[4] 2 2 2 Size to suit hose3[3] 3[3] 3 3 3 Size to suit hose[3] [3] — — — Used as upper saddle ondouble-hose rig; size to suithoseSeal, O-Ring (Note 1) (Note 1) (Note 1) (Note 1) (Note 1) Size to fit hoseShackle, Safety orScrew Pin(Note 1) (Note 1) (Note 1) (Note 1) (Note 1) Size and type to suitapplicationShackle, Special FAS 2 2 2 — — Used on riding line fittingsTools, UNREP Workingand Repair1 1 1 1 1 See paragraph 2.3.9Trolley, Free — 3 4 — —Trolley, Spanline — — — — 6Trolley, Spanwire 5 2 2 — —U-Bolt, Assembly — — 1 — —Wrench, Spanner 2" to4-3/4" (50.8 to 120.6mm)1 1 1 1 1*Refer to UNREP Hardware and Equipment Manual, NAVSEA S9570-AD-CAT-010[ ] Quantity shown is for double-hose rig.NOTES:1. Quantity as required.2. See paragraph 2.3.4 for use limitation to CV, LHA, or ship with aircraft on deck.3. Ten required. Used to secure hose when hose is stowed.Figure 4-11. Fueling-at-Sea Hardware for Delivery Ship — One Station (Sheet 4 of 4)4-26 ORIGINAL