Production versatility increased in semi-continuous ... - Seco-Warwick

More documents

Recommendations

Info

Semicontinuous CAB Furnace Active Only ®TYPICAL BRAZING TIMES FOR AOUTOMOTIVE HEAT EXCHANGERS INRADIATION FURNACE:Radiators:CACCondensersHeater cores12 - 16 min15 - 24 min12 - 16 min10 - 14 minSECO/WARWICK S.A.Practical benefit of Active Only ® semicontinuousfurnace:- load of radiators followed by load of CAC, followed by doublelayered condensers followed by load of heater cores, each load ofdifferent massSame high brazing quality for variety load obtainedusing the same parameter settings.
Semicontinuous CAB Furnace Active Only ®SECO/WARWICK S.A.- Indexing type mesh belt.- Interval of indexing based on feed back from control system.- Cycle time : time to reach the pre-set brazing temperature +desired soak time at brazing temperature.- Typical output: 3-5 loads per hour.
Page 1 and 2: Production Versatility Increasedin
Page 3: Available CAB furnace systems• Af
Page 7 and 8: Furnace Active Only ®- Phases of p
Page 9 and 10: Experiment to the display versality
Page 11: Semicontinuous CAB Furnace Active O
Page 14 and 15: Semicontinuous CAB Furnace Active O
Page 16 and 17: Active Only ®- Main Design feature
Page 18 and 19: PC/PLC Furnace Control System ACCUB
Page 24 and 25: Benefits of SemicontinuosCAB Furnac

Production versatility increased in semi-continuous ... - Seco-Warwick

Create successful ePaper yourself

Delete template?

Save as template?