Electromagnetic flow meters - OPTIFLUX 4000 - Forbes Marshall

More documents

Recommendations

Info

2 TECHNICAL DATAOPTIFLUX 4000PressureAmbientNominal flange pressureDIN (EN 1092-1)ISO insertion lengthASME B16.5JISVacuum loadPressure ranges for secondarycontainmentAtmosphericInformation for sizes larger than DN2000 / ASME80" on request.Standard:PN6 for DN1200...2000PN10 for DN200...1000PN16 for DN65 and DN100...150PN40 for DN2.5...50 and DN80Option:PN10 for DN1200...2000PN16 for DN200...2000PN25 for DN65 and DN100...1000PN40 for DN65 and DN100...600Other pressures on requestOptional for DN15...600Standard:150 lbs RF for ASME1/10...24"Option:300 lbs RF for ASME1/10...24"600 lbs RF for ASME3/8...24"900 lbs RF for ASME3/8...12"1500 lbs RF for ASME3/8...12"Other pressures on requestStandard:10 K for DN50...100020 K for DN2.5...40Option:20 K for DN200...600Other pressures on requestFor information on pressure limits depending on liner material seechapter "Vacuum load".Pressure resistant up to 40 bar / 580 psiBurst pressure up to approx. 160 bar / 2320 psi10www.krohne.com03/2009 - 4000525101 - TD OPTIFLUX 4000 R04 en
OPTIFLUX 4000TECHNICAL DATA 2Chemical propertiesPhysical conditionLiquidsElectrical conductivityWater: ≥ 20 μS/cmNon water: ≥ 1 μS/cmPermissible gas content (volume) ≤ 5%Permissible solid content ≤ 70%(volume)Recommended flow velocity -12...12 m/s / -40...40 ft/sOther conditionsProtection category acc. to IEC529 / EN 60529Standard: IP 66/67 (NEMA 4/4X/6)Optional: IP 68 (NEMA 6P)Vibration resistance IEC 68-2-6Random vibration test IEC 68-2-34Shock test IEC 68-2-27Installation condtitionsInlet runOutlet runDimensions and weightsMaterialsSensor housingFlangeLinerGrounding ringsMeasuring electrodesGrounding electrodes (option)≥ 5DN (without disturbing flow, after a single 90° bend)≥ 10DN (after a double bend 2x 90°)≥ 10DN (behind a control valve)≥ 2DNFor detailed information see chapter "Dimensions and weights".Standard: sheet steel, PU coatedOption: stainless steelOther materials on request.Standard: carbon steel, PU coatedOption: stainless steelOther materials on requestPTFE: standard for DN20, optional for DN200...600PFA: standard for DN2.5...6 and DN25...150ETFE: standard for DN200...2000PU: optional for DN200...1800hard rubber: optional for DN200...2000 (Ex only)Other materials on request.Stainless steel, Hastelloy ® C, Titanium, TantalumOther materials on requestAlso available as alternative for grounding rings (IFC 300 only):Virtual Reference.Standard: Hastelloy ® COption: Platinum, Stainless steel, Titanium, Tantalum (DN2.5...1200),low noise Hastelloy ® C4 (DN10...2000), Low noise SS 316 Ti (1.4571)(DN10...2000)Other materials on request.Same material as measuring electrodes.03/2009 - 4000525101 - TD OPTIFLUX 4000 R04 enwww.krohne.com11
Page 6 and 7: 1 PRODUCT FEATURESOPTIFLUX 4000Cons
Page 8 and 9: 2 TECHNICAL DATAOPTIFLUX 40002.1 Te
Page 12 and 13: 2 TECHNICAL DATAOPTIFLUX 4000Proces
Page 14 and 15: 2 TECHNICAL DATAOPTIFLUX 40002.2 Va
Page 16 and 17: 2 TECHNICAL DATAOPTIFLUX 4000DIN/IS
Page 18 and 19: 2 TECHNICAL DATAOPTIFLUX 4000300 lb
Page 20 and 21: 3 INSTALLATIONOPTIFLUX 40003.2.3 Fl
Page 22 and 23: 3 INSTALLATIONOPTIFLUX 40003.2.8 Op
Page 24 and 25: 4 ELECTRICAL CONNECTIONSOPTIFLUX 40
Page 26 and 27: 5 NOTESOPTIFLUX 400026www.krohne.co
Page 28: KKKKROHNE product overview© KROHNE

Electromagnetic flow meters - OPTIFLUX 4000 - Forbes Marshall

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?