Sigma-II Series SGM*H/SGDH USER'S MANUAL - Esco Drives ...

3.2 Ratings and Specifications of SGMPH (3000min -1 )(5) Holding Brake Electrical SpecificationsHoldingBrake RatedVoltage90 VDC24 VDCServomotorModelServomotorCapacityWCapacityWSGMPH-01 100 8.1SGMPH-02 200 7.6SGMPH-04 400 7.2SGMPH-08 750 7.5SGMPH-15 1500 10SGMPH-01 100 8.1SGMPH-02 200 7.6SGMPH-04 400 7.6SGMPH-08 750 7.5SGMPH-15 1500 10Holding Brake SpecificationsHoldingTorqueN·m (oz·in)0.318(45.0)0.637(90.2)1.27(180)2.39(338)4.77(675)0.318(45.0)0.637(90.2)1.27(180)2.39(338)4.77(675)CoilResistanceΩ (at 20 °C)Note: The holding brake is only used to hold the load and cannot be used to stop the servomotor.RatedCurrentA (at 20 °C)1000 0.091062 0.0851125 0.081083 0.083832 0.10871 0.3475.8 0.3275.8 0.3276.8 0.3157.6 0.4233.2.2 SGMPH Servomotors With Standard Backlash Gears• Time Rating: Continuous• Vibration Class: 15 µm or below• Insulation Resistance: 500 VDC, 10 MΩ min.• Ambient Temperature: 0 to 40°C (32 to 104°F)• Excitation: Permanent magnet• Mounting: Flange method• Gear Mechanism: Planetary gear mechanism• Thermal Class: B• Withstand Voltage:100V, 200V Servomotors: 1500 VAC for one minute400V Servomotors: 1800 VAC for one minute• Enclosure: Totally enclosed, self-cooled, IP55 (exceptfor shaft opening)• Ambient Humidity: 20% to 80% (no condensation)• Drive Method: Direct drive• Backlash: 15 min max.• Gear Rotation Direction: Same direction as servomotor3-13