Sigma-II Series SGM*H/SGDH USER'S MANUAL - Esco Drives ...

2.6 Selecting Peripheral Devices2.6.2 Molded-case Circuit Breaker and Fuse CapacityMainCircuitPowerSupplySinglephase100 VSinglephase200 VSinglephase220 VThreephase200 VThreephase400 VSERVOPACKModelCapacity(kW)SGDH-Power SupplyCapacity perSERVOPACK(kVA)Current Capacity of theMolded-case Circuit Breakerand the Fuse (A rms ) ∗1,∗2(Refer to 5.8.9)Main CircuitPower Supply0.030.05A3BEA5BE0.150.2540.10 01BE 0.400.20 02BE 0.60 60.03 A3AE 0.200.05 A5AE 0.250.10 01AE 0.4040.20 02AE 0.750.40 04AE 1.2 80.75 08AE-S 2.1 111.50 15AE-S 4.0 19Control CircuitPowerSupplyMain CircuitPower Supply* 1. Nominal value at the rated load. The specified derating is required to select an appropriatefuse capacity.* 2. Cutoff characteristics (25°C): 300% five seconds min. and inrush current of 20ms.* 3. A preventive circuit for inrush current is not built in the 24 VDC control power supply. Theprotective circuit must be designed by the customer.* 4. Make sure the current capacity is accurate. For the SERVOPACK with the cooling fan builtin,an inrush current flows; 200 % of the current capacity in the table above for two seconds,when turning ON the control circuit power supply to start the fan working.Note: Do not use a fast-acting fuse. Because the SERVOPACK’s power supply is a capacitorinput type, a fast-acting fuse may blow when the power is turned ON.Inrush CurrentControl CircuitPowerSupply0.26 32A 30A0.13 63A 60A0.13 ∗4 130A 66A118A10A0.45 05AE 1.4 40.75 08AE 1.91.0 10AE 2.371.5 15AE 3.2 100.15 ∗42.0 20AE 4.3 133.0 30AE 5.9 1763A5.0 50AE 7.5 28 67A6.0 60AE 12.5 327.5 75AE 15.5 410.27 ∗4 40A11.0 1AAE 22.7 6015.0 1EAE 30.9 810.3 ∗4 80A0.45 05DE 1.1 1.61.0 10DE 2.3 3.41.5 15DE 3.2 4.60.72.0 20DE 4.9 7.1∗4 20A3.0 30DE 6.7 9.75.0 50DE 10.3 14.9 78A6.0 60DE 12.4 17.87.5 75DE 15.4 22.31.2 ∗4 20A11.0 1ADE 22.6 32.715.0 1EDE 30.9 44.61.3 ∗4 40A60A(24 VDC) ∗322-29