Sigma-II Series SGM*H/SGDH USER'S MANUAL - Esco Drives ...

11.3 List of ParametersParameterNo.Name Setting Range Unit FactorySettingSettingValidationPn50A Input Signal Selections 1 − − 2100 AfterrestartReferenceSection−n.4th 3rd 2nddigit digit digit1stdigitInput Signal Allocation Mode(Refer to "7.3.2 Input Circuit Signal Allocation.")0 Uses the sequence input signal terminals with standard allocation. ∗1 Changes the sequence input signal allocation for each signal./S-ON Signal MappingSignal Polarity: Normal; Servo ON when ON (L-level)Signal Polarity: Reverse; Servo ON when OFF (H-level)(Refer to "8.3.1 Setting the Servo ON Signal.")0 ON when CN1-40 input signal is ON (L-level).1 ON when CN1-41 input signal is ON (L-level).2 ON when CN1-42 input signal is ON (L-level).3 ON when CN1-43 input signal is ON (L-level).4 ON when CN1-44 input signal is ON (L-level).5 ON when CN1-45 input signal is ON (L-level).6 ON when CN1-46 input signal is ON (L-level).7 Sets signal ON.8 Sets signal OFF.9 OFF when CN1-40 input signal is OFF (H-level).A OFF when CN1-41 input signal is OFF (H-level).B OFF when CN1-42 input signal is OFF (H-level).C OFF when CN1-43 input signal is OFF (H-level).D OFF when CN1-44 input signal is OFF (H-level).E OFF when CN1-45 input signal is OFF (H-level).F OFF when CN1-46 input signal is OFF (H-level)./P-CON Signal Mapping (P control when ON (L-level))(Refer to "9.4.4 Proportional Control Operation (Proportional Operation Reference).")0 to F Same as /S-ONP-OT Signal Mapping (Overtravel when OFF (H-level))(Refer to "8.3.3 Setting the Overtravel Limit Function.")0 Forward run allowed when CN1-40 input signal is ON (L-level).1 Forward run allowed when CN1-41 input signal is ON (L-level).2 Forward run allowed when CN1-42 input signal is ON (L-level).3 Forward run allowed when CN1-43 input signal is ON (L-level).4 Forward run allowed when CN1-44 input signal is ON (L-level).5 Forward run allowed when CN1-45 input signal is ON (L-level).6 Forward run allowed when CN1-46 input signal is ON (L-level).7 Forward run prohibited.8 Forward run allowed.9 Forward run allowed when CN1-40 input signal is OFF (H-level).A Forward run allowed when CN1-41 input signal is OFF (H-level).B Forward run allowed when CN1-42 input signal is OFF (H-level).C Forward run allowed when CN1-43 input signal is OFF (H-level).D Forward run allowed when CN1-44 input signal is OFF (H-level).E Forward run allowed when CN1-45 input signal is OFF (H-level).F Forward run allowed when CN1-46 input signal is OFF (H-level).1111-37